Series FPS provides low voltage signal and visual indication when liquid is present in non-pressurized piping or components. Designed for one-time use; requires simple sensor replacement after the sensor is triggered. In less aggressive chemical applications, the probes may be cleaned and re-used. Suitable for any conductive liquid with a resistance less than 3 Megohm.

• 24V DC low voltage control wire signals presence of liquid.
• IP67 DIN Connector with LED indicator and 2M molded cordset included.
• 1/4" Connection; 1/8" optional for use with Fail-Dry® (Consult Factory).
• Ideal for leak detection, water sensing, relief tanks, any non-pressurized location where the system operator must be alerted to the unexpected presence of liquid.

Specifications/Materials of Construction:

• Sensor available in PVC, CPVC, Natural Polypropylene, and PVDF. Sensing points are 18-8 stainless steel. Rated for maximum 4 amps at 24V DC.