PZiG Models offer capacities typically requiring motor driven pumps. Special models easily handle viscosities of 1000 CPS (up to 4000 CPS at reduced volume). Powerful onboard controls allow proportional flow rate, pH and residual chlorine control by direct analog connection eliminating the PID Controller and Inverter (plus the control panel to house them), that are required by similar sized motor driven pumps.

The injection rate can be set three ways by direct entry of: 

  • Stroke speed: 1 to 300 spm
  • Percentage: 1 to 100%
  • Injection rate: ml/mil
  • Manual stroke length adjustment 20% to 100%.
  • Onboard calibration measures the actual discharge volume under the exact operating condition of the specific installation and chemical, then stores that value to insure the correct injection rate.
  • Multi-pump proportional flow rate injection from a single direct flowmeter signal (pulse/analog).
  • Two point level switch control Batch injection
  • Interval injection • Proportional control with shift and proportional band function.
  • Two line LCD screen displays injection rate and/or operational progress. Note: Install a pulsation dampener for discharge lines greater than 7 feet to achieve maximum pressure capability.

– ALL MODELS

  • Ambient temperature: 32 to 104°F (0 to 40°C) Pumped liquids: Temperature: 32 to 104°F (0 to 40°C), Viscosity: 100 CPS max. except as noted
  • This pump is designed for outdoor use. Avoid installing pump in a location where service life could be shortened (i.e., where it is exposed to direct sunlight or driving rain).
  • This pump cannot pump liquids containing a slurry.
  • A relief valve should be installed on the discharge side, if the pump does not have a built-in relief valve and the discharge piping has a shutoff valve.

1 - 25 of 25 | Results Per Page | View |
1 

Item #

Item Name

Price

Add To Cart/Request Quote
N/A (5.4)GPH 140psi PVC (EPDM) Automatic Flow Control $2,329.00 Add To Cart
Request Quote
N/A (5.4)GPH 140PSI PVC (Viton) Automatic Flow Control $2,339.00 Add To Cart
Request Quote
N/A (5.4)GPH 100PSI PVC (Viton) High Viscosity Model $2,463.00 Add To Cart
Request Quote
N/A (5.4)GPH 140PSI Kynar(PTFE) $2,594.01 Add To Cart
Request Quote
N/A (5.4)GPH 140PSI Kynar(PTFE) include Anti-Syphon Ck/Valve, (PTFE)Tubing $3,180.00 Add To Cart
Request Quote
N/A (8.4)GPH 100PSI PVC (EPDM) $2,404.00 Add To Cart
Request Quote
N/A (8.4)GPH 100PSI PVC (Viton) $2,409.00 Add To Cart
Request Quote
N/A (8.4)GPH 100PSI PVC (Viton) High Viscosity Model $2,409.00 Add To Cart
Request Quote
N/A (8.4)GPH 75PSI Kynar(PTFE) $2,662.00 Add To Cart
Request Quote
N/A (8.4)GPH 75PSI Kynar(PTFE) include Anti-Syphon Ck/Valve, (PTFE)Tubing $3,248.03 Add To Cart
Request Quote
N/A (12.0)GPH 60PSI PVC (EPDM) $2,472.00 Add To Cart
Request Quote
N/A (12.0)GPH 60PSI PVC (Viton) $2,475.00 Add To Cart
Request Quote
N/A (12.0)GPH 60PSI PVC (Viton) High Viscosity Model $2,620.00 Add To Cart
Request Quote
N/A (12.0)GPH 60PSI Kynar(PTFE) $2,732.00 Add To Cart
Request Quote
N/A (12.0)GPH 60PSI Kynar(PTFE) include Anti-Syphon Ck/Valve, (PTFE)Tubing $3,316.00 Add To Cart
Request Quote
N/A (15.8)GPH 45PSI PVC (EPDM) $2,540.00 Add To Cart
Request Quote
N/A (15.8)GPH 45PSI PVC (Viton) $2,551.19 Add To Cart
Request Quote
N/A (15.8)GPH 45PSI PVC (Viton) High Viscosity Model $2,688.00 Add To Cart
Request Quote
N/A (15.8)GPH 45PSI Kynar(PTFE) $2,801.13 Add To Cart
Request Quote
N/A (15.8)GPH 45PSI Kynar(PTFE) include Anti-Syphon Ck/Valve, (PTFE)Tubing $3,384.00 Add To Cart
Request Quote
N/A (20.6)GPH 30PSI PVC (EPDM) $2,608.00 Add To Cart
Request Quote
N/A (20.6)GPH 30PSI PVC (Viton) $2,620.18 Add To Cart
Request Quote
N/A (20.6)GPH 30PSI PVC (Viton) High Viscosity Model $2,758.00 Add To Cart
Request Quote
N/A (20.6)GPH 30PSI Kynar(PTFE) $2,870.13 Add To Cart
Request Quote
N/A (20.8)GPH 30PSI Kynar(PTFE) include Anti-Syphon Ck/Valve, (PTFE)Tubing $3,453.16 Add To Cart
Request Quote
1 - 25 of 25 | Results Per Page | View |
1