• Prices Listed for 120/60 AC voltage, 11 Watt "W11" water and dust tight (NEMA-4X) coils.
  • Normally closed, in-line design with bubble-tight shut-off.
  • High pressures: Particularly for applications where high back-pressures (up to 70 PSI) are required e.g. controlling flow to spray nozzles, high pressure chemical injections, etc. Inlet pressure to 140 PSI.
  • High flow rates - Cv‘s from 5.2 on the 1/2” size to 80 on the 3” size.
  • Unique design: Teflon Bellows barrier type dynamic seal prevents leaking of fugitive emissions to the atmosphere.
  • Safety/Dependability: Patented Fail-Dry safety design feature provides advance visual warning if seal malfunctions, while permitting valves to continue operating until maintenance can be scheduled.
  • Cycle life in excess of 1,000,000 cycles.
  • Versatility: Can be used with all type solutions including acids, caustics, solvents and chlorine solutions.
  • Rugged thermoplastic construction is resistant to both internal & atmospheric corrosion. No metal parts in wetted areas.
  • Positive valve closure in the event of electrical failure.
  • Energy-efficient 11 watt coil.
  • Molded coil and standard DIN connector; designed to meet NEMA 4X.
  • Sizes: 1/2", 3/4", 1", 11/2", 2" & 3".

    Materials Of Construction: Series PS Pilot Operated Solenoid Valves are available in PVC and CPVC (Corzan), Polypropylene and PVDF (Kynar).

Unit of Measure

Valve Size

N/A 3/4 inches

End Connections

N/A NPT

Seal Material

N/A Viton

Cv

N/A 7.6

Maximum Inlet Pressure at 75°F (24°C)

N/A 140 psi

Maximum Inlet Pressure at 75°F (24°C)

N/A 9.7 bar

Maximum Inlet Pressure at 140°F (60°C)

N/A 40 psi

Maximum Inlet Pressure at 140°F (60°C)

N/A 2.8 bar

Minimum Inlet Pressure

N/A 5 psi

Minimum Inlet Pressure

N/A 0.4 bar

Maximum Outlet Pressure at 75°F (24°C)

N/A 70 psi

Maximum Outlet Pressure at 75°F (24°C)

N/A 4.8 bar

Minimum Differential Pressure

N/A 5 psi

Minimum Differential Pressure

N/A 0.4 bar

Valve Material

N/A CPVC