A heat and chemical resistant meter body of injection molded Polysulfone. Floats are #316 SS or PTFE depending on calibration. Not recommended for direct sunlight applications.
  • Temperature: 150°F/60°C at 0 pressure
  • Pressure: 130 psig/8.9 Bar at 70°F/21°C
  • Full Scale Accuracy: ±2%
  • Meter Body material: Polysulfone
  • Adapters material: 2" F/NPT Polysulfone
  • O-rings: Viton
  • Float material: #316 SS, Hastelloy C or PTFE
  • Max. Pressure drop: 2 psi
Unit of Measure

Webb/P#

N/A 230320

Calibration

N/A 6.0 to 60 GPM30 to 230 LPM

Adapter Size

N/A 2 inches

End Connections

N/A F/NPT

Max. Pressure Drop

N/A 2 psi

Temperature (at zero pressure)

N/A 150 °F65 °C

Pressure at 70°F

N/A 130 psi

Pressure at 21°C

N/A 8.9 bar

Full Scale Accuracy

N/A ± 2 %

Meter Housing

N/A Polysulfone

Adapter Material

N/A Polysulfone

O-rings

N/A Viton

Float Material

N/A #316 SS

Model Description

N/A In-Line units (flow through).

N/A

  • When installing any Blue-White flowmeter, PTFE tape has proven to be the thread sealant of choice.
  • Avoid using commercial sealants such as Loctite, etc.
  • Also, PVC glues and fumes cannot come in direct contact with flowmeters.