Designed for applications requiring a compact, very cost effective and high pressure rated valve with extended cycle life. Among lower cost solenoid valves, Series WCM represents the best combination of price and performance available.
Materials Of Construction: Series PS Pilot Operated Solenoid Valves are available in PVC and CPVC (Corzan), Polypropylene and PVDF (Kynar).
1/4" & 1/2" Sizes With Pressures to 70 PSI Ideal For Highly Corrosive Acids and High Purity Liquids
Series EASY-NO solenoid valves are normally-open. They are specifically designed for applications which require that the valves remain in the open position to permit continued flow when intentionally de-energized or when it would be dangerous for valves to close or remain closed in the event of an emergency power failure. Normally-open valves also offer an energy and cost saving consideration if they are required to be open for a large percentage of the time. These valves can be used with corrosive or ultra-pure liquids, and handle pressure or drain applications. They are direct-acting and do not require line pressure to aid in closing and opening.
Plast-O-Matic offers a wide selection of solenoid valve coils to meet your electrical requirements. Coils are available in 11 or 24 watt with standard AC voltages of 24, 120, and 240 at 60 Hz, with 110, 220, and 230 at 50 Hz. DC coils are available in 12 0r 24 volt. The availability of certain voltages may vary with the enclosure type and coil type.
W11 (11 Watt - Black Coil) This efficient dependable 11 watt coil is for Series EAST, Series PS. CSA approved (except 24/60 and 12V DC). It meets NEMA-4X water and dust-tight requiremeents and is suitable for corrosive atomospheres compatible with thermoset polyester and polyamide.
W24 (24 Watt - Black Coil) CE and CSA approved. NOTE: W24 Coil includes Z-Cool DIN connector and lighted connector.