• Product Image- Metering Type 323 Ball Valve

    Replaced By The Type 523 Metering Ball Valve

    The metering ball valve Type 323 is equipped with union ends and has an integrated gauge to measure exactly the required throughput over the whole setting range of 0 to 180°. The direction of flow is indicated.

    • Precise control of minimal flow quantities.
    • Indicator scale allows fine adjustment.
    • Standard overall lengths.
    • Teflon seat.
    • Also available in polypropylene (PP).

  • geo523groupImage

    The Type 523 metering ball valve is ideal solution where precise flow control is needed. It has a special V-notch ball and operates with a 180º turn versus a 90º turn most ball valves have. The Type 523 has an integrated scale to indicate degrees of opening and provides a very linear flow curve. Polypropylene, PVDF, and PVC are the available materials (CPVC and ABS on request).

    The design is completely updated, allowing the user to read the scale from all possible angles. The new circular scale, repeated on both sides of the valve, makes it easy to read from all directions. The improved scale display creates a high contrast, which aids in reading of the valve position. Additionally, arrows on the scale indicate the flow direction through the valve. The optimized shape of the ball and 180° rotation allows for more precise control of your process flows. You can also mount an electric actuator (EA21) with a positioner to aid in fully automating your flow control system

    • Micro-doser
    • Excellent control characteristics
    • Designed for easy installation and removal
    • Angle of operation 180° with scale
    • Integrated stainless steel mounting inserts
    • Ball seals PTFE
    • Z-length, end connectors and union nuts not compatible to Type 323 Option:
    • Other materials on demand

  • GEO324soc

    • Disconnection one end only
    • Ball seals PTFE
    • Angle of operation 90°

  • geo353COLORO

    The Coloro is ideally suited for many basic applications with water. The high-tech design with monobloc structure provides a high level of safety – user cannot disassemble or adjust. A two piece body, permanently fused around an integral ball and stem, eliminates stem blowout and ball position backlash. Available versions include:

    • water distribution
    • swimmimg pools
    • agriculture
    • irrigation
    • fish farming

    Note These Items Sold By Box Qty's.

  • geo375BlVlv

    Complement valve to the ball valve Type 546 for non-critical applications. The ball valve Type 375 offers you a basic PVC true union ball valve. Actuation is not available for the 375.

    • available from ½” to 6” (6” venturied)
    • handle with integrated tool for removing/adjusting the union bushing
    • full port design
    • compact length
    • 10,000 life cycle
    • blow-out proof stem

  • geo543

    The valve for all mixing- and diverting processes in your application. The ball valve type 543 is available as a horizontal and vertical version. The horizontal valve can be ordered with L- or T-Port ball. The vertical valve comes in the L-Port configuration or with a optional diverter ball.

    • Horizontal:
      • manual, electric and pneumatic actuated
      • ball with L-Port / T-Port
      • 180° end stop on request
      • multifunctional handle (lockable, 45° pitch)
    • Vertical:
      • manual, electric and pneumatic (only with diverter ball) actuated
      • ball with L-Port and diverter ball
      • multifunctional handle (lockable, 45° pitch

  • Product Image- Cartridge Ball Valve With True Union Ends Type 546

    The Type 546 Ball Valve, successor to the proven Type 346 Ball Valve, is the next generation in an established family of products behind which stand George Fischer’s 40 years of experience in plastic piping systems.

    • EPDM and FPM seals and PTFE ball seats standard.
    • 232 psi rating for PVC, CPVC, PVDF socket.
    • ASTM 1970-01 compliant end connections.
    • Union nuts with strong buttress threads.
    • Seat carrier with fine pitched thread for precise adjustment.
    • Can be actuated after installation.

  • geo546LockHandle

    • Designed for easy installation and removal
    • Not dimensionally compatible with Type 346 and Type 370
    • Ball seals PTFE
    • Integrated stainless steel mounting inserts
    • Lockable handle with ratchet settings
    • Threaded valve ends are only enclosed for 3/8" to 2"
    • Contact USCO for customization
    • Multifunctional module with integrated limit switches
    • Pneumatic or electric actuators from GF

  • geoTeeValve

    CPVC and PVC True Union Tee Valves shall have a Type 546 Ball Valve cemented to a tee. The valve end will be shipped with a plug. Socket and threaded ends shipped loose for field installation. Incorporated into its design safety features is a blow-out proof stem with intended break point and the ability to hold pressure when the downstream union nut is removed.

    • Standard Size range 1 x 1/2 to 8 x 2
    • Available in PVC and CPVC with solvent cement tee and socket or threaded valve end
    • EPDM seals and PTFE ball seats standard.
    • 232 psi rating for PVC, CPVC, socket
    • ASTM 1970-01 compliant end connection on valve
    • Valve has union nuts with strong buttress threads
    • Seat carrier with left-handed, fine- pitched thread for precise adjustment
    • Many other options and size configurations available within Type 546 ball valve, including FPM seals, PP and PVDF materia

  • geoType104A/BV

    Available in PVC and CPVC, the type 104 ball valve from Georg Fischer offers an economic solution for less demanding applications. The valve operates on 80 to 240 volts and auto senses either AC or DC. The type 104 is based on the same industrial ball valve Georg Fischer uses in other applications. This means the valve is true union and can be repaired if need be. With a 35% duty cycle the valve is suitable for mid to light cycle conditions

    • Size 1/2”-2”
    • Voltage 80-240 AC/DC
    • Manual Override
    • Material PVC, CPVC
    • Connection Ends Socket, Flanged, Threaded NPT
    • Seat PTFE
    • Seals EPDM or FPM
    • Mounting Stainless steel threaded inserts for easy and secure mounting
    • Duty Cycle 35%
    • Limit Switches Two SPST 5A General

  • Product Image- Actuated Ball Valve Type 233

    Electrically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 107 uses the new Type EA 11 actuator which can be fitted onto the valve in process.

    • 35% duty cycle.
    • Lightweight.
    • Corrosion resistant.
    • Maintenance free, 250,000 cycle life.
    • Available in PVC, CPVC, PP, and PVDF, sizes 3/8"-2".
    • PP and PVDF available in sizes 16 mm - 63 mm.
    • EPDM and FPM seals.
    • 115/230 VAC 50/60 Hz or Specify For 24VDC Option.
    • Connections:
      • PVC/CPVC (socket, threaded, flanged)
      • PP/PVDF (threaded, flanged, metric socket fusion).
    • Manual override standard.
    • Options include heater, fail safe unit, and position sensing switches.
    • IP67 rated with cable gland.
    • CE, CSA approved; UL pending.

  • geo131

    Designed to be modular, the 130 series electrically actuated ball valve is adaptable to a variety of conditions and applications. The type 130 series, our premium actuated valve, is available in PVC, CPVC, Polypropylene, and PVDF materials. With the optional positioner, it goes from being a simple on/off valve to a precision flow control device, integrated into systems controlled by PLCs and other computerized instrumentation.

    • Size range 3/8” to 4”
    • 110-230VAC auto-detecting or 24V AD/DC
    • Manual override on actuator
    • Available in PVC, CPVC, polypropylene, and PVDF
    • PTFE seat
    • EPDM or FPM seals
    • UL certified
    • NSF approval Options:
    • Limit switches
    • Fail safe back-up battery
    • Silicone free version
    • Positioner (4-20mA, 1-10V)
    • ASI control

  • Product Image- Actuated Ball Valve Type 107

    Pneumatically actuated ball valve for aggressive fluids and industrial applications. Based on the new Type 546 ball valve, the Type 233 uses the new PA 11/21 pneumatic actuators which can be fitted onto the valve in process.

    • Lightweight.
    • Corrosion resistant.
    • Maintenance free, 250,000 cycle life.
    • Available in PVC and CPVC sizes 3/8" - 2".
    • Available in PP and SYGEF - PVDF in sizes 16 mm - 63 mm.
    • EPDM and FPM seals.
    • Available fail close, fail open, or double acting.
    • Connections: PVC/CPVC (socket, thread, flanged).
    • Options include declutchable manual override, stroke limiter, and position indicator.

  • geoEA25-EA250GroupImage

    GF actuators inspire imagination in part due to their unique optical feedback from an integrated color LED. Even in difficult lighting conditions and with a closed cover, these give highly visible feedback as to the position of the valve in the process, as well as the operating status of the actuator. EA25-250 Equipped with the latest electronics, the new actuators are designed for long-term success. Using four pushbuttons, the end and center positions can be adjusted quickly and without tools. Even settings for 3-way valves can easily be adjusted including a middle position. The LED color combinations and 360° position detection combined with an internal smart display make operation easy to understand.

  • Product Image- +GF+ DIASTAR Type 025 Diaphragm Valve

    Being Discontinued While Supply Last

    The Georg Fischer DIASTAR series of diaphragm valves is distinguished by a future-oriented range of models and a wide variety of accessories. The attractive design is accompanied by numerous special product features:

    • Pre-loaded compression springs: safety
    • Actuator housing of PP-GF: very low weight
    • Very compact design: Compact systems.

  • Geo Diastar 5 series.

    The new Pneumatic Diaphragm Valves of GF Piping Systems represent a revolution in terms of safety, efficiency and simplicity.
    Like the hand valves, the new DIASTAR also has a central union nut. This connection is non-corrosive, is temperature stable, and has a high pressure rating up to 240 PSI (for water use only).
    Because of the doubled Cv values, the energy expenditure can be reduced considerably. At the same time, the flow characteristic is very linear and thus ideally suited for control applications.
    Features like rotatable air connections and pre-tensioned spring-kits facilitate installation and maintenance enormously. The accessory interface allows simple integration into facility automation.

    Joining Technology:
    •Type 514 body: Unions with Solvent Cement Sockets, Threaded Sockets, and Fusion Sockets
    •Type 515 body: Unions with Solvent Cement Spigots, Socket Fusion Spigots, and Butt Fusion Spigots
    •Type 517 body: Unions with Fixed Flanges, and Loose Flanges
    •Type 519 body: Unions with Branched Valve with Butt Fusion Spigots

  • geoDIASTAR6

    Introducing the DIASTAR Six low-cost pneumatically-actuated diaphragm valve from GF Piping Systems: This cost-effective solution comes with proven reputation of the 5 Series family of diaphragm valves. The Diastar Six comes in a Fail Closed configuration, in PVC and CPVC with an elastomeric (EPDM) diaphragm. It provides the basic functions of a pneumatic diaphragm valve in a small package, making it an ideal option for space-limited applications.

    Features

    • Size: 3/4”–2”
    • Valve assembly: Threaded connection without bolts
    • Lower body (wetted): PVC, CPVC
    • Actuator body: Glass-filled polypropylene
    • Diaphragm material (wetted): EPDM CODE DESCR LIST

    The DIASTAR Six offers a cost-effective solution with a long working life for elastomer diaphragms up to 6 bar. It is available Fail Close, in PVC or CPVC with EPDM diaphragms only. Its small size makes it an attractive option for tight installations.

    CANNOT USE FEEDBACK/POSITIONER!

  • geoDIASTAR10

    The Diastar Ten and TenPlus valves from GF Piping Systems incorporate several innovative features. The valve has Cv values that average at least double the conventional design. This high-flow design allows the valve to be used where diaphragm valves were previously not possible due to flow restriction. In addition, the new design eliminates the four bolts used to hold the valve together, which eliminates a corrosive weak point. The valve is available in PVC, CPVC, PP, PP-n, and PVDF. A modular design allows easy field installation of an actuator to a manual valve as well as other accessories such as position feedback switches.

    Standard Features

    • Select Option: For a Flange ASTM Connection
    • Size ½–2” (larger sizes available in 025 series)
    • Valve assembly Threaded connection without bolts
    • Lower body (wetted) PVC, CPVC, PP, Natural PP, PVDF, ABS
    • Actuator body Glass-filled polypropylene
    • Diaphragm material (wetted) EPDM, FPM, PTFE with FPM backing, PTFE with EPDM backing, NBR
    • Pressure Diastar Ten and TenPlus: 150 PSI DIASTAR Six: 90 PSI
    • Lockable handle Optional Features (Not available on DIASTAR Six)
    • Electro pneumatic positioner
    • Electric feedback switches
    • Manual override

  • Product Image- True Union Diaphragm Valve Type 314

    Items Being Discontinued and Replaced By Type 514

    Suitable for slurries and abrasive media. Corrosion resistant and maintenance free. Standard overall length.

    • Manually operated diaphragm valve Type 314 with union ends, PVC construction.
    • Short overall length.
    • True Union design.
    • Built-in locking handle (optional).
    • Position indicator.
    • Flow in either direction irrespective of installation position.
    • Bracketing facility incorporated in the valve.
    • Available in other materials.
    • Hand wheel with Built-In Locking Mechanism is Optional.

  • sig514PVC

    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Designed for easy installation and removal
    • Short overall length
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches
    • PN16 available as a configuration

  • sig514PVC

    • Silicone free / paint-compatible
    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Designed for easy installation and removal
    • Short overall length Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches
    • PN16 available as a configuration

  • sip514cpvc

    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Designed for easy installation and removal
    • Short overall length
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches

  • sip514cpvc

    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Designed for easy installation and removal
    • Short overall length
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches

  • sig517pvc

    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Overall length EN 558
    • Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS EN 1759
    • Joining face flat
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches

  • sig517CPVC

    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Overall length EN 558
    • Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS 1560, BS EN 1759
    • Joining face flat
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches

  • sig519multi

    The Type 514-519 diaphragm valves from GF Piping Systems incorporate features never before seen in a plastic diaphragm valve. The valve has Cv values that average at least double the conventional design. This high-flow design allows the valve to be used where diaphragm valves were previously not possible due to flow restriction. In addition, the new design eliminates the four bolts used to hold the valve together. This eliminates a corrosive weak point. The Type 519 zero-static version uses the pipe wall as the weir and provides for maximum purity and drainability. The valve is available in PVC, CPVC, PP, PP-n, and PVDF. Standard versions can handle up to 150 PSI. All PVDF and an optional PVC version allow for pressures as high as 240 PSI.

    • Material: PVDF-HP
    • Double flow rate compared to predecessor
    • One housing nut replaces four screws
    • Handwheel with built-in locking mechanism
    • Smallest possible dead space Option:
    • Contact customer service for customization
    • Self adjusting multifunctional module with integrated limit switches

  • sigLimitSwitchLarge

    Diaphragm Valve Limit Switches

    Available: Electric Feedback Module.

    The electric feedback module sets new standards in terms of user friendliness and simplicity.

    Previous solutions required considerable modifications of the diaphragm valves. The new electric feedback module is fast to install. Order it, mount it on the valve, connect the wiring, open and close it twice for calibration and then it is ready for action. No hassle with drilling holes, ohm meters, calibrations, etc. Simplicity at its best.

  • geo365btyValve

    The type 365 butterfly valve can be used universally as a shut-off or control valve in high purity water treatment or water filtration applications.

    The manually operated type 365 PTFE lined lug style butterfly valve with PFA encapsulated disc includes key features such as ANSI 150 bolt patterns, pressure ratings up to 150 psi and temperatures up to 400°F.

    All valves have a one-piece disc and stem arrangement with a lock-in PFA encapsulation. All valves are cleaned and manufactured for ultrapure water service.

     

    • ISO 5211 actuator mounting for gear operators and actuators.
    • Self-lubricating bearings in the upper and lower stem journals.
    • Precision machined virgin PTFE liner is 100 mils minimum thickness.
    • Precision PFA encapsulation 100 mils thick, bonded and interlocked to the one-piece disc stem provides maximum permeation protection and prevent delamination.
    • Belville disc springs exert uniform loading through the pusher pressing the PTFE liner and the shoulder of the PFA encapsulated disc/stem together, resulting in leak-free mechanical stem seal.

  • geoManualBV_PartsImage

    Highest quality In the raw materials we use as well as in the entire production process. From incoming goods inspection all the way to delivery.
    Safety in operation Thanks to a safe connection with the buttress thread specially developed for plastics, new added features such as a handle that locks, and our worldwide customer support service.
    Tested through and through Extensive prototype and pre-series testing in the EN ISO IEC 17025 accredited George Fischer test lab.
    100% leakproof testing is integrated in the production process.

  • GF563

    Specifically for water applications, the Type 563 Aqua butterfly valve operates at pressures of up to 150PSI and can handle temperatures from 32°F to 142°F. The wetted inner body is made of PVC with EPDM seals. Because of the plastic body, the Aqua valve is lightweight and installs easily between flanges. The Aqua valve is compatible with ANSI and DIN flanges and is available from 2” to 12”. The Q-ring seals allow the valve to be installed without additional gaskets.

    Applications

    • For water use only
    • Aquariums
    • Water Parks

    Optional Features

    Electric actuation
    • Pneumatic actuation

  • geo567&568btyVlv

    Butterfly Valve Type 567-568

    Available now are 14" to 24" Type 567 Wafer Style Butterfly Valves! GF Piping Systems presents the 567/568 type series of butterfly valves with a comprehensive range of products for wafer and lug style applications. Our systems modular design principle allows you to exchange individual system components – fast, easily and at very little expense.

    • manual valves with hand lever or reduction gear
    • pneumatically or electrically actuated
    • handle extension
    • fine adjustment lever allows disc to be opened at any angle from 0° to 90°
    • increased chemical resistance and a wider temperature range with PVDF liner, PTFE disc seal

  • geo568Gear

    Available now are 14" to 24" Type 567 Wafer Style Butterfly Valves! GF Piping Systems presents the 567/568 type series of butterfly valves with a comprehensive range of products for wafer and lug style applications. Our systems modular design principle allows you to exchange individual system components – fast, easily and at very little expense.

  • geo567pvdf

    Discontinued See Type 578 Butterfly Valve

    Butterfly valves type 567/568 PVDF-PTFE are an ideal addition to the existing product range. Due to the new profile seal made of PTFE, they offer even greater chemical resistance and are suitable for conveying aggressive media

     

  • geo568Gear

    Discontinued See Type 578 Butterfly Valve

    Type 568 Butterfly Valve SYGEF® Standard PVDF Reduction gear with handwheel Model:

    • Material: PVDF
    • Outer body in GGG-40.3 epoxy-coated
    • Connecting dimension ANSI B 16.5 Class 150
    • Overall length according to EN 558-1, ISO 5752 Model with PTFE seal in DN50 - DN80 on request

  • gf360BallCheckImage

    GF Piping Systems ball check valve Type 360 is weighted for vertical installation and is used to prevent backflow. Available in a variety of materials and end connections, the Type 360 is suitable for a broad range of applications. The self cleaning design and the profile seal guarantee a high level of process reliability. The Type 360 seals tightly even at low pressure.

    Being Discontinued Effective June 2012

     

  • gfChkValveImage

    The check valve types 561 and 562 ring in a new generation of valves, featuring more safety, simplicity and efficiency.

    Our engineers focused primarily on two areas in the development of the new check valves: How can we make an established product type even more reliable? And how can we reduce the wear and tear on moving parts and consequently keep maintenance to a minimum? The solution was to completely redesign the inner workings of the valve.

    GF Piping Systems developers examined every function and optimized every detail until a much improved valve performance was measured. The two check valves type 561 and type 562 fit into the most common piping systems worldwide thanks to our comprehensive product range. Online Catalog

  • Product Image- Y-Check Valve Type 304

    • Excellent flow characteristics.
    • Minimum pressure loss.
    • Mount horizontally or vertically.
    • Efficient at low working pressures.

  • gfGateValve

    GF Piping Systems gate check valve Type 369 is designed especially for large installations, demands low service effort, and is compact. The size range, combined with its simple installation ability, unique spring option for horizontal mounting, and excellent flow characteristics, make it an ideal check valve solution for a variety of applications.

    Installation couldn't be simpler: the valve is inserted between two standard ANSI or ISO/DIN flanges, for extremely easy installation or removal in the field

    The gate check valve can be installed either horizontally or vertically.

     

  • sigRetainingNuts

    A total of three retaining nuts to our Signet product line to improve compatibility and durability of Integral products. The retaining nuts being offered are PP Black, PVDF Natural, and the already existing Valox Yellow.

    Signet integral products will be shipped with the recommended retaining nut based on the sensor. For example, a 2551 with PP body will be shipped with a PP Black retaining nut, while a 2551 with PVDF body will be shipped with a PVDF Natural retaining nut. Although the yellow Valox retaining nut is available to order, we highly recommend selecting a retaining nut that is most appropriate for your system.

    The PP and PVDF retaining nuts will be available for the following products below.
    Valox retaining nuts can be ordered separately.

    • 2537 Paddlewheel Flowmeter
    • 2551 Magmeter Flow Sensor
    • 8150 Integral Battery Powered Totalizer

  • sigAquaTap

    The Georg Fischer Type 530 recirculating laboratory faucet is designed to provide constant DI fl uid fl ow to point of use when used with the new Inline Flow Diverter (IFD). The unique design of the IFD provides high fl ow from the distribution main through the faucet for constant water movement. The IFD uses a slight orifi ce reduction to create a differential pressure imbalance which forces water through the faucet with minimal pressure loss. The system is further enhanced by using smooth bore interconnecting tubing for design fl exibility and simplifi ed piping installations. Up to three faucets can be served from a single IFD. The faucet is made from high purity PVDF, and the IFD is available in SYGEF® PVDF or PROGEF® natural PP in either weld or sanitary clamp connections. Simple heat fl aring tools make leak-proof, minimum crevice connections between components.