• WidosFusionTool2

    Hand held Socket fusion tool with an electronic temperature control for the reception of anti-stick coated heating spigots and sockets from OD 20 – OD 63 mm. It is equipped with control lamps, a digital display, and buttons to set the temperature. For support on the building site or in the workshop, one holding device is included with the heating tool. Everything is packed in the steel carrying case including Spigot and Sockets.

    Weld-IT® features:

    • Lightweight, durable hand held tool
    • 2 Receptacles for sockets and spigots
    • 110v power supply (230v available)
    • Electronically adjusted heating element, with digital indicator
    • Equipped with 20mm – 63mm spigots and sockets
    • Table Top Holder included, for “hands free” welding
    • Table/Bench Vise Holder included for “hands free” welding
    • IPS Spigots and Sockets available

  • widosHandHeld110

    Hand held Socket fusion tool with an electronic temperature control for the reception of anti-stick coated heating spigots and sockets from OD 20 – OD 125 mm. It is equipped with control lamps, a digital display, and buttons to set the temperature. For support on the building site or in the workshop, one table support holding device is included with the heating tool. Everything is packed in the steel carrying case, including 75mm, 90mm & 125mm Spigot and Sockets. 

    Weld-IT® features:

    • Lightweight, durable hand held tool
    • Single Receptacle for socket and spigot
    • 110v power supply (230v available)
    • Electronically adjusted heating element, with digital indicator
    • Equipped with 75mm – 125mm spigots and sockets
    • Table Top Holder included, for “hands free” welding
    • IPS Spigots and Sockets available

  • widosJig1

    Hand held Socket fusion tool equipped with a Prismatic operating set of Master Clamps, fast turning Screw Drive for quick, easy opening and closing in tight field positions. Very lightweight, rugged, design insures a capability to make socket welds in the toughest of places. The combination of being easy to handle and easy to use makes this tool a must have for contractors and installers putting together socket welded piping systems. Designed to weld pipe and socket fittings from OD 63– OD 170 mm, it is operated with a cordless drill and 6mm allen wrench for fast, smooth operation during the welding process. Everything is packed in the rugged carrying case that is easy to transport and built to last

    Socket JIG features:

    • Lightweight, durable hand held tool
    • 2 sets of Prismatic clamps for pipes, sockets
    • A combination of Aluminum and Steel construction ensures durability
    • Fast closing screw drive minimizes change-over time during fusion
    • Equipped with handles for easy moving into weld position
    • Rugged transport case with rollers for easy transport on, or to, the site

  • widos2500Image

    Handy, mobile plastic welding machine for PE, PP, PVDF and PB for use in the workshop and on the building site. Par- ticularly suitable for sanitary installations and wastepipes. The diameters are selectable from OD 50 to OD 160 mm, OD 50 to OD 250 mm and OD 50 to OD 315 mm. Ma- chine with electrically opera- ted planer, electronical hea- ting element, basic clamping tool divided into two parts (except for WIDOS 2500 OD 160 mm), each side swivelling up to 15° with clamping ins- erts and pipe support as well as transport and mounting crate for safe, clean and pro- tected storage. If desired there is a combined butt/socket welding machine available. Versions also in 110 V, °F or with lbs-force- display.

  • widos5000image

    A servo-driven welding machine for the heating element butt welding of PE, PP, PVDF and PVC pipes from OD 160 up to OD 500mm. Ideally suited for the reliable fabrication of fittings e.g. elbows, T- and cross-pieces of the highest quality in the workshop. The machine is mounted on an extremely solid and torsion-resistant basic frame and has two movable machine tables running on precise guiding units that are highly capable of bearing the weight of the heaviest wall pipe. The table drive allows the exact control of weld forces and assures smooth operation. The tables are constructed in an ideal way with respect to the demands of the plastic fusion process. The unique floating fixation of the tables enables a very solid suspension for both the heating element and planer. Both are retracted pneumatically between the basic clamping tools by means of high quality linear guidings, and meet highest demands of quality and service life. The clamping tools have been optimized for handling and stability, and are designed for swivel mounting on the tables for the fabrication of fittings The clamping tools can be moved horizontally for a simple compensation of alignment throughout the welding process. The clamping of the welding pieces is achieved manually via spindles in the standard version and may be optionally supplemented by hydraulic controlled systems.
    The machine is controlled via the CNC 3.0 control unit setting a new benchmark with regard to operator convenience. Data entry is achieved via a barcode reading pen, or can be achieved via manual input. The CNC 3.0 also has an enhanced memory for storing up to 30,000 welds and is equipped with an operator console to meet all the demands on a modern control unit. In combination with the extremely dynamic servo drive you can achieve the shortest of change- over times critical with materials with short tolerance zones, while also controlling exact joining methods and precise weld force regulation. A further advantage is the automatic welding cycle utilizing the pneumatically cushioned heating element motion that is controlled by a processor for precise operation. In this way operator interferences can be practically excluded and the highest accuracy in weld repeatability is realized.
    The anti-stick coated heating element is equipped with a connecting cable and special plug, as well as a control lamp for monitoring during the weld process and assures an exact temperature distribution throughout the element ensuring quality welds and long service lifetime. The electronic temperature regulation and monitoring is according to DVS 2208 and is included in the CNC control; and makes for easy connection to the control unit. The electric planer, with the chain drive in a closed housing, produces a high torque performance that has been optimized in its high cutting performance while running smoothly.

  • Widos3511

    WIDOS 3511 Socket Fusion Machine for the socket welding of PE, PP, and PVDF pipe and fittings up to 125 mm. The machine frame is of solid welded steel construction. Table travel movement is accurately controlled by a rack and pinion drive mechanism. The holding clamps for pipe and fitting are of prismatic design. A Dial Stop allows for adjustment of the penetration depth, which differs depending on diameter and type of fitting (ASTM in mm or IPS, Type A or B per DVS). Once adjusted, a stop device prevents excessive insertion of the pipe into the fitting. The heating element holder is of a floating design to allow for the optimum heating geometry of the sockets and spigots.

    W3511 features: 

    • Solid, durable welded steel construction of machine
    • Transportation case used as mobile bench top for set up anywhere
    • 110v power supply (230v available)
    • Electronically adjusted heating element, with digital indicator
    • Prismatic Clamping devices allow clamping of any OD from 20mm – 125mm
    • Equipped with 20mm – 125mm spigots and sockets
    • Heating element is easily removable, can be used as a hand held device.
    • IPS Spigots and Sockets available, per ASTM or DVS

  • Widos7511

    WIDOS 7511 Socket Fusion Machine for the socket welding of PE, PP, and PVDF pipe and fittings up to 75 mm. The machine frame is of solid welded steel construction. Table travel movement is accurately controlled by a rack and pinion drive mechanism. The holding clamps for pipe and fitting are of prismatic design. A Dial Stop allows for the adjustment of the fitting penetration depth, which differs depending on diameter and type of pipe (ASTM mm or IPS, or DVS Type A or B). Once adjusted, a stop device prevents excessive insertion of the pipe into the fitting. The heating element holder is of a floating design to allow for the optimum heating geometry of the sockets and spigots. W7511

    features:

    • Solid, durable welded steel construction of machine
    • Transportation case made from sheet steel for maximum protection
    • 110v power supply (230v available)
    • Electronically adjusted heating element, with indicator
    • Prismatic Clamping devices allow clamping of any OD within size range
    • Equipped with 20mm – 75mm spigots and sockets
    • Heating element is easily removable, can be used as a hand held device.
    • IPS Spigots and Sockets available

  • widosMiniPlastGrpImage1

    For field and bench fabrication using butt fusion on PE, PP and PVDF pipes and fittings. This machine is detachable from the base unit, allowing on site welding in very small and confined spaces, such as above ceilings and below raised floors. Standard power requirement is 110v. Machine options include Ratchet or Electric Planers, IPS or Metric Reducer Inserts, and a choice of power requirements (110v or 230v).

    • MiniPlast features:
    • Removable Clamping device from base for tight welding areas
    • Angular Master Clamps for site fitting production
    • Optional power supply requirements (110v or 230v)
    • Electronically adjusted heating element, with indicator
    • Easily installed Reducer Inserts for welding 20mm – 90mm

  • widosMaxiPlastImage

    MaxiPlast for field and bench fabrication using butt fusion on PE, PP and PVDF pipes and fittings up to 6” IPS. This machine is detachable from the base unit, allowing on site welding in very small and confined spaces, such as above ceilings and below raised floors. Machine options extended pipe supports, IPS or Metric Reducer Inserts, and a choice of power requirements (110v or 230v).

    MaxiPlast features:

    • Horizontal and Vertical adjustments for proper alignment
    • Removable Clamping device from base for tight welding areas
    • Angular Master Clamps for site mitered fitting production
    • Optional power supply requirements (110v or 230v)
    • Electronically adjusted heating element, with indicator
    • Easily installed Reducer Inserts for welding 50mm – 110mm
    • 6” IPS Master Clamps for easy conversion to IPS Inserts

  • WidosMiniPlastIR2

    The Miniplast/2 – IR is a machine developed for special applications in the manual welding of pipes and fittings from OD 20 - 110 by means of contact-free infrared technology.

    All material applicable for infrared welding like e.g. PP and practically all fluoric material like PVDF, PCTFE, PFA etc. can be processed easily and securely with this machine without any system bonding. The material can be contained in large aluminium tools resp. as an alternative in small fitting clamps and fixed there securely. In order to mill the pieces in a true to size manner prior to welding, an electric planer with built-in limit stops is hinged into the basic machine and afterwards hinged and securely stored in a special heat-protected box if not needed anymore.

    The heating element up to max. 550°C in high temperature version with ceramic special coating and limit stops for an exact distance in radiation is built on a solid base frame with precise 2-axis-guiding and manually drawn between the welding pieces. Temperature adjustment is carried out by means of a digital control unit with separate mains plug and switch

  • widosMiniPlast2Image

    Extended MiniPlast for field and bench fabrication using butt fusion on PE, PP and PVDF pipes and fittings. Extended version allows field fabrication of Tee pieces. This machine is detachable from the base unit, allowing on site welding in very small and confined spaces, such as above ceilings and below raised floors. Machine options include Ratchet or Electric Planers, IPS or Metric Reducer Inserts, and a choice of power requirements (110v or 230v).

    MiniPlast2 (Extended version) features:

    • Horizontal and Vertical adjustments for proper alignment
    • Removable Clamping device from base for tight welding areas •Angular Master Clamps for site fitting production
    • Extended version allows field fabrication of Tee pieces
    • Optional power supply requirements (110v or 230v)
    • Electronically adjusted heating element, with indicator
    • Easily installed Reducer Inserts for welding 20mm – 90mm

  • widosSaw

    WIDOS Rotation Circular Saw Two types are available for the cutting and bevelling of plastic pipes:

    Modell 315: from OD 110 up to OD 350
    Modell 500: from OD 180 up to OD 500

    With this light transportable machine plastic pipes of po- lyolefine can be cut rightang- led. Cutting depth Z 60 mm. For the cutting of GPR-shea- thed plastic pipes or GPR- pipes a special cutting plate can be mounted for the right-angled cutting