• Product Image - Laramy Model Vari-FT

    Model Vari-FT provides its own air supply from the ambient atmosphere making it ideal for installation, repair and field work on hard and soft PVC and similar thermoplastics including plexiglass, polycarbonate, polyisobutylene, polystyrene, polymide, etc. Temperature can be steplessly regulated with an electronic controller up to 1100° F. Hand welding tip VFT-20 supplied. Self-contained air supply from built-in blower/motor. On/Off Switch. Stepless temperature control knob.

  • Laramy30-10

    Basic High-Speed Torch

    The basic Model 30-10 torch is a rugged, high-quality production tool. A lightweight, compact design makes the Model 30-10 easy on the operator and convenient for tight work areas. It is equipped with 12' of vinyl hose, regulator, gauge, torch rest, Laramy combination tip and your choice of 'Located Heat' element. Specify 250, 350, 450, or 550 watt element with order. The Model 30-10 is shipped in a plastic carrying case and includes a copy of Laramy's exclusive 56-page manual "Making Even Better Plastic Welds". Additional elements and accessories can be added at any time.

  • Laramy30-102

    High-Speed Fabricating Outfit

    The Model 30-102 is the welding outfit for production and general shop use. The leading choice of fabricators, the Model 30-102 includes the basic torch, a new portable welding stand with combination regulator and filter, gauge, thermometer, Laramy combination tip and your choice of two 'Located Heat' elements. Specify 250, 350, 450 or 550 watt elements with order. The Model 30-102 is shipped in a plastic carrying case and includes a copy of Laramy's exclusive 56-page manual "Making Even Better Plastic Welds". Additional elements and accessories can be added at any time.

  • Product Image - Laramy Model 30-200 Compressor/Torch Outfit

    Factory-Wired separate On-Off switches for compressor and torch - interlocked to prevent operation of torch without compressor.

    Complete operating instruction on control panel Pilot light.

  • lp30-300

    • Uses inexpensive compressed air during warm-ups and between welds
    • Cuts nitrogen consumption by 50%
    • Pays for itself in a few weeks use
    • Fail-safe controls prevent torch burn-outs even if gas runs out
    • Complete gas and electrical controls on one panel

    Includes LPNS plus Laramy High Speed Production Torch, choice of 2 elements, electrical and gas connectrions and fittings, rugged carrying storage case, welding book.

  • LARAMY30-400

    Economy Compressor/Torch Outfit

    The Model 30-400 welder is a good, inexpensive, lightweight portable outfit suitable for light field repair work and some light fabrication jobs. The Model 30-400 comes equipped with a good quality, diaphram compressor which provides 1 3/4 cfm at 3 psi, the basic torch, Laramy combination tip and your choice of one 'Located Heat' element. Specify 250, 350, 450 or 550 watt element with order. The Model 30-400 is shipped in a rugged metal tool case and includes a copy of Laramy's exclusive 56-page manual "Making Even Better Plastic Welds". Additional elements and accessories can be added any time.

  • Product Image - Laramy Custom Welding Tips

    Engineered stainless steel tips for all hot gas welding requirements. Laramy introduced the High-Speed Tip and the all-purpose Combination Tip. Choose from the most complete selection of tips in the plastics welding industry

  • LARAMYWELDINGROD

    Consistent diameter, the consistent shape, and the continuous spool length

    Premium-Grade Plastic Welding Rod is available in these materials:

    • HDPE
    • MDPE
    • LDPE
    • PVC type I
    • POLYPRO
    • POLYURETHANE
    • POLYCARBONATE
    • Co-Poly
    • ABS • HALAR®
    • KYNAR®
    • KING STARBOARD®

  • lp6FW

    The Fusion Pipe Welders are electric tubular heaters cast in aluminum, mounted on a clampable base and controlled by a stepless rheostat.

    The unit is useful for both shop and field welding of PE, PP and PVDF pipes and couplings. The fusion welder CANNOT be used on PVC or ABS pipe.

    The Fusion Pipe Welder is available in two sizes: LFW-1 for pipe from 1/2" to 2" I.P.S. and for pipe from 16mm to 63mm and LFW-2 for pipe from 3" to 4" I.P.S. and for pipe from 75mm to 110mm. The unit comes with a control box which regulates the temperature. The "Ryton" coated dies are optional items and come in male/female sets. Individual replacement dies are also available. A mounting bolt, nut and washer is provided for securing the dies to the welders.

  • LaramyBendingBars

    This inexpensive, precision tool heats thermoplastic sheeting for forming bends.
    Handles materials up to 1/2" thick. Combination of variable temperature control plus two heating surfaces results in adaptability to a wide range of materials, sizes and thicknesses.
    The exclusive Laramy replaceable heating elements permit inexpensive repairs in cases of burn-outs without need to purchase the entire bar.
    The units are available in two sizes to handle up to four foot and eight foot wide sheets. The four foot bars are rated at 500 watts each and the eight foot at 1000 watts each. Both operate from a standard 120vac outlet.

    • Replaceable Heating Elements
    • Rugged Aluminum Construction
    • Two Sizes: For 4' and 8' Sheets
    • Stepless Heat Controller
    • Optional Sword for sharp 90° bends