• Product Image - Self-Aligning Bulkhead Fittings

    Hayward Self-Aligning Bulkhead Fittings allow tank piping connections to be made in a straight line without fabricating special fittings to correct for the curvature of the tank. Using a precision machined ball sealed inside a bulkhead fitting housing, the Hayward Self-Aligning Bulkhead Fitting permits connections with an offset angle of up to 27°. Made in USA.

    Caution: Important to know all requirements from each manufacture are met, to ensure a successful overall application.

  • Product Image - Poly Bolted Tank Flanges

    • Stainless steel bolts.
    • Bolt head plugs sealed ultrasonically.
    • Glass reinforced polypropylene.
    • EPDM gaskets standard.

    Caution: Important to know all requirements from each manufacture are met, to ensure a successful overall application.

    .Key features include of the Tank-Tite:

    When installed in the bottom of the tank, the “Bottom Drain” Tank Flange allows full drainage.Ultrasonically Sealed.100% Fully Drainable. Fits most cone bottom & chemical inductor tanks, 30 gallons and larger.

  • hayBFAS

    Hayward Safe-T-Loc Bulkhead Fittings (Tank Adapters) easily permit safe, quick pipe connections to be made to plastic, metal or plastic tanks. Simply cut the proper size opening in the tank, slide the body of the fitting through it, and then just tighten the nut. The fitting is now ready to accept the piping connection.

    Caution: Important to know all requirements from each manufacture are met, to ensure a successful overall application.

    .Key features include of the Tank-Tite:

    • Rated to 150 PSI
    • EPDM or Viton Gasket Seal
    • All-Plastic Construction
    • Hex Body for One Person Installation
    • Proven, Rugged Design

  • hayBFASfitting

    The BFAS Series Standard Flange Short Barrl Fittings (Tank Adapters) offer safe, quick pipe connections to standard wall thermoplastic and metal tanks. The fittings feature left hand threads to prevent the fitting from unscrewing and are designed for easy one person installation. 

    Caution: Important to know all requirements from each manufacture are met, to ensure a successful overall application.

    Key features include of the Tank-Tite;

    • Short Pattern / Barrel in PVC, CPVC or PP
    • FPM or EPDM Gasket Seal
    • Rated to 150 psi
    • Left Handed Threads
    • Heavy Duty Buttress Threads to help prevent leaks under pressure
    • Hex body for easy installation
    • PVC Cell Class 12454 per ASTM D1784
    • CPVC Cell Class 23447 per ASTM D1784
    • PP per ASTM D4101
    • Heavy-Duty FPM & EPDM Gasket Seals

  • hayCCP_BulkheadCompressionFitting

    Hayward Flow Control announces the launch of the CCP Series Tank-Tite™ Compression Fittings to our line of market leading Bulkhead Fittings and Tank Accessories. The Tank-Tite™ is a revolutionary and patent pending design PVC compression fitting that provides a constant load on the gasket of the bulkhead fitting to overcome and compensate for tank wall expansion/contraction due to changes in temperature and/or pressure within the tank. It also imparts at the same time a constant load on the bulkhead fitting nut that reduces the possibility of loosening of the nut due to vibration within the system.

    Caution: Important to know all requirements from each manufacture are met, to ensure a successful overall application.

    Key features include of the Tank-Tite:

    • Robust PVC Upper and Lower Body Construction.
    • 17-7PH Stainless Steel Wave Spring
    • Rated to 150 PSI Non-Shock @70ºF.
    • Fits with all Hayward BFA Series Bulkhead Fittings.