• pomPCWRimage

    Standard Features:

    • Choice of diaphragm valve or ball valve, same price.
    • No corrosion, no maintenance.
    • Choice of true unions or custom end connectors.
    • Molded, machined and assembled in USA.
    • 100% tested at the factory.
    • Lower cost and smaller footprint than individually assembled sticks.
    • Easily adapts to any piping configuration.

    Custom Sticks: Can be designed and built to any configuration orientation. Valves, gauges, meters and other components can be customized for any application.

    Shown with optional style gauges. 2-1/2" Stainless steel is standard

  • pomPCWSImage

    Standard Features:

    • Superior pressure regulator performance.
    • No corrosion, no maintenance.
    • True union connection on ball valve; threaded, socket, or custom connections on pressure regulator.
    • Molded, machined and assembled in USA.
    • Lower cost and smaller footprint than individually assembled sticks.
    • Easily adapts to any piping configuration.
    • Elimination of threaded joints results in superior mechanical strength.

    Custom Sticks:

    • Can be designed and built to any configuration/ orientation. Valves, gauges, regulator and other components can be customized for any application.

  • pomFSAimage

    Series FSA adjustable Flow Switch is available in PVC or CPVC, with flow rate range from 8 - 1900 GPM, designed for pipe size 1" through 10". Offers continuous adjustment during operation; SPDT 15 amp switching capacity model or Dry Computer/PLC Interface model.

    Features:

    • Ideal for confirming operation of pressure relief, regulating or actuated valves.
    • 8 to 1900+ GPM for 1" to 10" piping
    • Particle contamination resistance is provided by a single convoluted elastomeric seal which is continually flushed by working fluid flow.
    • Wetted surfaces of PVC and EPDM Elastomeric Standard (Viton Special Order.) 
    •  Continuous adjustment while operating.
    • Responds to flow only, independent of line pressure, temperature, environment
    • SPDT 15 amp switching capacity model or Dry Computer/ PLC Interface model 
    •  Maintenance and checkout is a snap for your present personnel using an uncomplicated standard test meter.
    • Maximum flow range flexibility is provided by three adjustment options:
    • Continuous adjustment while operating via FORCE/BALANCE spring
    • Accuracy ±10% with ±5% repeatability
    • Nema 4 or 6 design

  • pomFSimage

    Series FS pre-set Flow Switch is available in PVC or CPVC, with flow rate range from .7 - 25 GPM. Switches offered from 5 VDC to 240 VAC.

    Features:

    • Ideal for confirming operation of pressure relief, regulating or actuated valves.
    • Flow switch performance Independent of pressure and temperature.
    • Customizable design. • Extremely Wide Operating Range: .7 – 25 GPM
    • Higher flow rates/pipe sizes available on special order.
    • Maximum flow may be five times normal flow.
    • Positive stop essentially eliminates fatigue effects of turbulence, vibration and flow surge on flow detecting element.
    • Very low pressure drop - typically less than 1.0 psig at normal flow rate.
    • Accuracy ±10% with ±5% repeatability.
    • Nema 4 design. • Switches 5 VDC to 240 VAC.
    • Provides dry circuit interface with computer and PLC modules.
    • Small size and low profile provides easy mounting in crowded installations.

  • pomLLSimage

    Series LLS with pivot pin design is 1 1/4" x 1/4"x 1/2" reducer bushing for through wall mounting. SPST reed switch for 120/240 VAC 50 Watt power or optional DC dry circuit for computer/PLC interface

    Features:

    • Side and Top Mount
    • No wetted metals or elastomers
    • Superior pivot pin design is 10x less sensitive to deposit build-up than sliding float models •
    • 1-1/4" x 1/4"x 1/2" reducer bushing for through wall mounting
    • 24˝ of twisted pair 22 gauge output wire
    • SPST reed switch for 120/240 VAC 50 Watt power
    • Optional DC dry circuit for computer/PLC interface
    • Nema 4 design

  • pomFPS

    Series FPS provides low voltage signal and visual indication when liquid is present in non-pressurized piping or components. Designed for one-time use; requires simple sensor replacement after the sensor is triggered. In less aggressive chemical applications, the probes may be cleaned and re-used. Suitable for any conductive liquid with a resistance less than 3 Megohm.

    • 24V DC low voltage control wire signals presence of liquid.
    • IP67 DIN Connector with LED indicator and 2M molded cordset included.
    • 1/4" Connection; 1/8" optional for use with Fail-Dry® (Consult Factory).
    • Ideal for leak detection, water sensing, relief tanks, any non-pressurized location where the system operator must be alerted to the unexpected presence of liquid.

    Specifications/Materials of Construction:

    • Sensor available in PVC, CPVC, Natural Polypropylene, and PVDF. Sensing points are 18-8 stainless steel. Rated for maximum 4 amps at 24V DC.

  • pom_DPGimage

    Plast-O-Matic differential pressure gauges are designed to measure the difference in pressure between two points in a system and present the resultant differential pressure directly on a single gauge dial. A magnetic movement allows the simultaneous sensing of both pressure points, while completely isolating the gauge function from the pressure chamber. No mechanical seals are required. Each of these devices are engineered for durability and performance. Maximum line pressure rating is 200 PSI.
    Series DPG: Differential Pressure Gauge, 2.5" Dial
    Series DPGS: Adjustable Differential Pressure Gauge/Switch, 2.5" Dial

    • Quantitative indication of pressure differential across a filter, points of use, etc.
    • 1/4" FNPT Connections
    • Choice of 0-15 PSID or 0-30 PSID Gauge; accuracy is ±2% FS
    • Corrosion-resistant thermoplastic connections; PVC or CPVC
    • EPDM or FKM elastomers
    • No wetted metal parts

  • pom_DPIimage

    Series DPI: Compact Differential Pressure Indicator
    Series DPIS: Compact Differential Pressure Indicator/Switch

    • Clear indication of filter performance
    • Compact, economical, reliable
    • 1/8" FNPT Connections
    • Choice of 0-15 PSID or 0-30 PSID Gauge; accuracy is ±5% FS Corrosion-resistant thermoplastic connections; PVC or CPVC
    • EPDM or FKM elastomers • No wetted metal parts.
    • Made in USA

    Plast-O-Matic differential pressure indicators are designed to show at a glance if maximum filter pressure has been exceeded. Maximum line pressure rating is 150 PSI

  • pomFIGimage

    Series FIG: Variable Area Flow Indicator Gauge, 2.5" Dial
    Series FIGS: Variable Area Flow Indicator Gauge/Switch, 2.5" Dial

    • Quantitative readout of variable area flow
    • 1/4" or 1/2" FNPT Connections
    • Accuracy is ±5% FS
    • Corrosion-resistant thermoplastic connections; PVC or CPVC
    • EPDM or FKM elastomers
    • No wetted metal parts.
    • Made in USA

    Plast-O-Matic flow gauges indicate liquid flow rates from low flows of 0-1 GPM to 0-10 GPM, even when used at high line pressures. Flow gauge sensors can be supplied with switches or relays to initiate alarms, activate other equipment, or shut the system down. Two switches are used when high and low limits are desired. Maximum line pressure rating is 200 PSI.