• blw600

    Fixed Speed Mechanical Cam Output Adjustment

    Features

    • All ball bearing permanently lubricated gear motor for smooth, quiet, powerful operation.
    • Double-ball inlet and outlet cartridge type ceramic check valves. Chemical resistant PVDF pump head, valve body and fittings, ceramic balls, Viton static seals and TFE/P ball seat o-rings. No metal springs are used.
    • Outputs to 516 GPD
    • Output pressures to 125 PSI
    • Stroke adjustment from 4-100% permits accurate small injection at a high rate per minute 27:1 turndown
    • PTFE coated EP diaphragm
    • Durable metal epoxy coated construction
    • PVDF suction (foot) valce with Viton and TFE/P o-rings, ceramic check ball and removable polypropylene filter screen.
    • Includes 3/8" OD suction and discharge tubing, Injection fittign with spring-loaded check valve and all mounting.

  • blwC600HVimage

     

    • All ball bearing, permanently lubricated gear motor for smooth, quiet, powerful operation.
    • Solid, clear acrylic pump head with large high-output diaphragm.
    • EP diaphragm.
    • Outputs to 791 GPD.
    • Output pressures to 20 PSI.
    • Stroke adjustment from 4-100% permits accurate small injections at a high rate per minute.
    • 27:1 turndown Durable metal epoxy coated construction.
    • PVC suction strainer with removable polypropylene filter screen.
    • Includes 1/2” ID clear PVC suction and discharge tubing,
    • PVC Injection fitting and all mounting hardware.

  • Product Image - C-1500N Series Injector Pumps

    Finally, the dependability CHEMFEED is known for, now built for INDOOR or OUTDOOR APPLICATIONS. All C-1500N models are equipped with a stylish black weatherresistant housing of Valox outdoor applications demand.

    All C-1500N models are equipped with a stylish black weatherresistant housing of Valox outdoor applications demand.The C-1500N comes STANDARD with Blue White's popular heavy duty pump head assembled with chemically resistant internals such as PTFE-coated EP diaphragms, Viton O-ring seals, Hastelloy C valve springs and PVDF cartridge fittings. In addition, each unit includes Blue White's best PVC anti-siphon check valve with Viton seals and Polypropylene footvalve strainer. Also included is a molded acrylic flow indicator with glass float attached to suction tubing. The C1500N's ball bearing motor provides smoother and stronger operation which can handle pressures up to a maximum of 125 PSI.

    Deluxe models offer added flexibility. They come with all the quality standard items listed above, but also have a built-in electronic percentage timer giving you the ability to adjust the injector for even lower feed rates. This feature also allows you to keep full stroke to adjust feed rate by time only, or adjust time on and stroke. Blue White offers you a choice! Numerous combinations of voltages, material construction sizes and styles are available to practically build your own pump to meet your required applications. Other electrical and material options available.

  • Product Image - C-1700 Dual Head Injector Pumps

    The all new design of the C-1700N begins with the twin, heavy-duty cartridge valve heads. This durable liquid end is injection molded of Polypropylene and includes: Double-sealed PVDF cartridge valve fittings, Viton O-ring seals, ceramic ball checks, Hastelloy valve springs, and a PTFE/EDOM diaphragm.

    Each head is independently controlled, and, because of the unique design, motor power is utilized to maximum efficiency. This is particularly important for overcoming back pressure.

    The C-1700N is well-suited to a wide variety of applications. It can be used in inject: different amounts of like chemical into separate systems, feed two different chemicals into the same system, or when a single head pump doesn't provide quite enough output.

  • blwa1600image

    • Maximum feed rate: 112 GPD
    • Maximum PSI: 25
    • Maximum fluid temperature: 130 deg. F
    • Maximum viscosity: 500 Centipoise
    • Maximum suction lift: 10 ft. water at 0 PSI
    • Turn down ratio: non adjustable
    • Duty cycle: Continuous Power Requirements:
      • Standard: 115V / 60Hz - 45 watts
      • Optional: 220V / 50Hz - 45 watts (20% less feed rate)
      • Optional: 230V / 60Hz
      • Optional: 24V / 60Hz Amperage draw:
      • 115V / 60Hz, starting .74 / running .45
      • 220V / 50Hz, starting .31 / running .19
      • 230V / 60Hz, starting .36 / running .21
      • 24V / 60Hz, starting 3.4 / running 2.0
      • Dimensions: 4-3/4" H x 10" W x 6-1/4" D
      • Shipping weight: 8 lbs.

  • Product Image - FLEXFLO C-1100V

    TWO OUTPUT CONTROL OPTIONS:

    Deluxe F Models feature stroke length and analog speed control. The pump's speed is adjustable from 5-100% of the maximum using a dial knob style control. The minimum recommended output is .25% of maximum.

    Deluxe V Models feature stroke length, manual digital percentage and external input signal speed control. The unit accepts pulse inputs from 1-999 Hz and 4-20mA or 0-10Vdc analog input signals. The minimum and maximum speed at the minimum and maximum input values can be programmed using the digtal LCD display.

    Variable Speed DIAPHRAGM Injector Pump for Industrial Water Treatment Applications

    • Accepts 4-20mA, 0-10VDC and pulse input signals
    • Flow rates to 360 GPD, pressure to 150 PSI
    • Accuracy: &#plusmn; 1% repeatability full range
    • Low pulsation - smooth gearmotor operation
    • Variable speed and stroke length adjustment
    • Flow Output Verification Alarm System (Requires Micro-Flow Sensor sold separately)
    • Alarm output- relay (1 amp)
    • Ceramic double ball check valves
    • PVDF valves with Aflas ball seats
    • Recommended Service Warning System
    • Easy to read LCD display and controls
    • Corrosion resistant enclosure

    C-1100F (dial knob control) •Manual output control

    • EasyDial knob style - output percentage speed adjustment
    • Mechanical stroke length adjustment (cam type)
    • Nothing to program
    • 5 - 100% output adjustment
    • On-Off power switch

  • blwC1100ximage

    Standard X Models Feature a quick adjusting, high accuracy mechanical stroke length control. The pump's efficient design allows for a minimum stroke length of 5%. Minimum recmmended output is 5% of maximum.

    Deluxe C Models Feature stroke length and electronic time interval control. The pump's on time is adjustable from 5-100% of the repeating 5 second time interval. (0.25-5.0 sec.) The high freqency of the repeating 5 second time interval, and the extremely accurate mechanical stroke adjustment, result in a higher frequency of small injections per minute. Minimum recommended output is .5% of maximum.

    Digital E Models Feature stroke length, electronic user programmable time interval (interval lengths from 1 thru 99 seconds are user programmable), and external input signal control. The unit accepts pulse inputs (programmable from 1-9900) which can trigger programmable timed chemical injection batches from 1-99 seconds in duration. Analog input signals can be used to remotely vary the interval timer's on-time adjustment.

    • Superior pump head design
    • All ball bearing, permanently lubricated gear motor for smooth, powerful operation.
    • Pump head design and material options.
    • Efficient, dependable design - each unit is factory tested.
    • Private labeling for volume purchasers
    • 3/8" OD x 1/4" ID tubing connectons

  • Product Image - FLEXFLO A-100NV

    Variable Speed PERISTALTIC Dosing Pump for Industrial Water Treatment Applications.

    • Accepts 4-20mA, 0-10VDC and pulse input signals
    • Flow rates to 95 GPD, pressure to 100 PSI
    • Accuracy: 1% repeatability full range
    • No pulsation - continuous stream injection
    • Tube Failure Detection (TFD) Alarm System
    • Alarm output- relay (1 amp)
    • Flow Output Verification Alarm System (Requires Micro-Flow Sensor sold separately)
    • Peristaltic Operation - No Valves to Clog
    • Recommended Service Waming System
    • Easy to read LCD display and controls
    • Corrosion resistant enclosure

  • blwMicroFlo

    Micro-Flow Sensor Applications

    Are you sure the pump is actually pumping? An empty chemical tank, Clogged injection fitting, lost prime, and other problems can prevent a metering pump from actually injecting chemical - even though the pump is in good working order!

    The Micro-Flw Verification Sensor can be connected directly to Blue-White model A-100NV & C-1100V metering pumps and verify that chemical injection has actually occurred. The pump’s sophisticated electronics constantly monitor the sensor. If chemical should fail to inject, the pump will stop and an alarm relay will close allowing for remote alarm indication or initiation of a back-up injector

    Micro-Flow Features:

    • Installs directly on Blue-White metering pumps.
    • Easy, three-wire connection made in the pump’s junction box.
    • No special connectors to buy.
    • No calibration required.
    • Detect a clogged injector.
    • Detect an empty chemical supply tank.
    • Detect a lost prime condition.
    • Six flow ranges available.

    Micro-Flow Specifications:

    • Max. Working Pressure: ......... 150 psig (10.3 bar) @ 70 F (21 C)
    • Max. Fluid Temperature: ......... 200 F (93 C) @ 0 PSI
    • Body, Paddle, Axle material: .. PVDF
    • Connector material ................ 3/8” Tubing connectors: PVDF
    • O-ring seals: ............................ Viton
    • Compression seal to pump:... PVC
    • Approximate shipping wt........ 1 lb. (.45 kg)

  • blwChemFeedIndicator

    Rhythmic rising and falling indicates positive flow. Air bubbles indicate chemical has exhausted. Stationary ball indicates no flow. Problem could be: lost prime, stopped motor, plugged injection fitting, faulty tube or diaphragm, plugged or dirty footvalve filter or chemical has been exhausted for a lengthy period of time.

  • Product Image - Chem-Pro C3 Series Diaphragm Pump

    • Max. Working Pressure: 175 psig (12.1 bar)
    • Max. Fluid Temperature: 130°F (54°C)
    • Ambient Temp Range: 14° to 115°F (-10° to 46.1°C)
    • Output Adjustment Range: 2-100% in 1% increments
    • Duty Cycle: Continuous
    • Maximum Viscosity: 1,000 Centipoise
    • Maximum Suction Lift: 15ft. Water, 0 psig (4.5m, 0 bar)
    • Enclosure: NEMA 4X, (IP66)
    • Voltage (amp draw):
      • 115VAC/60Hz, 1ph (1.5 amp max)
      • 230VAC/60Hz, 1ph (.7 amp max)
      • 220VAC/50Hz, 1ph (1 amp max)
    • Power Cord Plug Type:
      • 115V60Hz - NEMA 5/15 (USA)
      • 230V60Hz - NEMA 6/15 (USA)
      • 220V50Hz = CEE 7/VII (EU)
    • Dimensions: 9"H x 131⁄8" W x 103⁄4" D
    • Approximate Shipping Wt: 29 Ib.

    C3F Models have Manual Speed Control
    C3V Models have External Speed Control

  • blwChemProImageW/Cover

    • Max. Working Pressure: 175 psig (12.1 bar)
    • Max. Fluid Temperature: 130°F (54°C)
    • Ambient Temp Range: 14° to 115°F (-10° to 46.1°C)
    • Output Adjustment Range: 2-100% in 1% increments
    • Duty Cycle: Continuous
    • Maximum Viscosity: 1,000 Centipoise
    • Maximum Suction Lift: 15ft. Water, 0 psig (4.5m, 0 bar)
    • Enclosure: NEMA 4X, (IP66)
    • Voltage (amp draw):
      • 115VAC/60Hz, 1ph (1.5 amp max)
      • 230VAC/60Hz, 1ph (.7 amp max)
      • 220VAC/50Hz, 1ph (1 amp max)
    • Power Cord Plug Type:
      • 115V60Hz - NEMA 5/15 (USA)
      • 230V60Hz - NEMA 6/15 (USA)
      • 220V50Hz = CEE 7/VII (EU)
    • Dimensions: 9"H x 131⁄8" W x 103⁄4" D
    • Approximate Shipping Wt: 29 Ib.

    C3F Models have Manual Speed Control
    C3V Models have External Speed Control

  • bwA2image

    FEATURES

    • Feed Rates to 16.0 GPH (60.6 LPH)
    • Pressures to 125 PSI
    • 100:1 Turndown Ratio
    • Tube Failure Detection
    • Variable Speed DC Motor
    • 4-20mA, Pulse Input and Manual Speed Control
    • NIMA 4X (IP 66) Washdown
    • 2 Year Warranty

  • Blank

    Pumps & Parts

    (1000)

  • Blank
  • Blank
  • Blank
  • Blank
  • Blank
  • Product Image- FlexPro-A3.gif

    Patented Tube Failure Detection

    New to our ProSeries™ lineup is our Flex-Pro™ high pressure peristaltic metering pump. Spec the A3 in your next job!

    • No valves (no clogging), Self Priming
    • Volume output not affected by changes in back pressure
    • Shortest lead tim in industry (3 to 5 days)
    • Volume output not affected by changes in back pressure
    • Variable speed brushless DC motor
    • Washdown, NEMA 4X (IP66)
    • Max feed rate 33.3 GPH (126 LPH)
    • Continuous pressure up to 125 PSI (8.6 bar)
    • Continuous duty cycle
    • Multiple outputs:
    • Scalable output signal to control other pumps or external devices (4-20 mA and pulsed output)
    • Three contact closures
    • One 10 amp relay
    • Multiple inputs: 4-20 mA 0-10 VDC
    • Pulsed Batch (program trigger from 1 - 1,000 pulses)
    • Contact Closure (remote Start/Stop)
    • Perfect for use with a PLC to control chemical feed! And more...
    • Automated parts per million dosing
    • Feature used to extend tube life (Patent Pending)
    • Safety sensor protects operator and aides in tube replacement (Patent Pending)
    • High resolution multi-color LCD (RGB)
    • Accuracy: +/- 0.5%
    • Repeatability: +/- 0.5%
    • Output adjustment: 0.04 - 100% (0.05 - 125 RPM)
    • Dimensions (mounting bracket bolt hole dimensions)
    • Larger Images: A3F (manual speed control only) A3V (full feature, manual and remote)

     

  • bluewhiteA4F_peristalticPump

    Patented Tube Failure Detection

    New to our ProSeries™ lineup is our Flex-Pro™ high pressure peristaltic metering pump. Spec the A4 in your next job!

    • Manual pump speed control
    • Tube Failure Detection (TFD)
    • Prime button Rotor reverse
    • Tube life timer
    • Output: 10 amp relay Input: Contact Closure (remote start / stop)
    • Displays % motor speed and RPM
    • Flow verification sensor compatible
    • Color LCD (RGB multicolor)
    • Output Adjustment: 2500:1 (.05 to 125 RPM)

  • bluewhite_A4VperistalticPump

    Patented Tube Failure Detection

    New to our ProSeries™ lineup is our Flex-Pro™ high pressure peristaltic metering pump. Spec the A4 in your next job!

    • Features at a glance (same as A4F including the following):
    • Inputs (fully configurable):
    • 4-20 mA, 0-10 VDC, pulsed, contact closure (remote start / stop)
    • Outputs (fully configurable): 4-20 mA, pulsed, 10 amp relay, multiple contact closures
    • Automated parts per million dosing
    • Batch dispensing
    • Repeating time cycle
    • Displays (color): % motor speed, RPM, output volume, alarm screens, incoming signal value, etc