• siga
  • sig7310Image

      Signet 7310 Switching Power Supplies provide regulated output voltage in compact and lightweight plastic housings for DIN Rail mounting. The series includes five different output capacities from 0.42A to 4A (10W to 96W), all of which accept universal AC line voltage input and meet worldwide standards for performance and safety. These units meet the power requirements for a single system, multiple Signet instruments or other devices requiring 24 VDC operation.
      • Universal AC input/Full range
      • Protections: Short circuit/Overload/Over voltage
      • Cooling by free air convection
      • Install on DIN rail TS-35/7.5 or 15
      • NEC class 2 / LPS compliant
      • Built in DC OK active signal
      • LED indicator for power on
      • No load power consumption < 1W for 7310-7024 and < 0.75W for others
      • 100% full load burn-in test

  • sig8058image

    Description The Signet i-Go™ 8058 Signal Converter accepts any 4 to 20 mA signal and converts it into the Signet digital (S3L) format, the serial data format used by the Signet 8250, 8350, 8450 and 8900 instruments. When used with the 8900 Multi-Parameter Controller, the measurement type and operating range are defined in the 8900 setup menu. When used with level, temperature and pressure transmitters, the 8058 is configured at the factory to the user’s specifications.

    The wire-mount single-channel version is easily mounted anywhere in the interconnecting wiring between the sensor and the instrument.

    The DIN rail mounted dual-channel version can convert one or two separate 4 to 20mA inputs into a digital (S3L) output.

    • Connects with level, temperature, pressure and multiparameter Signet instruments and other manufacturers’ transmitters
    • Up to two 4 to 20mA sensor inputs
    • Connects additional measurement parameters to Signet 8900 Multi-Parameter instrument
    • Wire or DIN rail

  • sig8059Image

    Signet 8059 External Relay Modules supplement the output capabilities of certain host instruments such as the Signet 8900 Multi-Parameter Controller. AC-powered versions accept universal line voltage, and also provide 24 VDC output that can be used to power the host instrument or other device(s).

    The host instrument controls relay operation by way of a single digital (S3L) connection. The compact plastic housing is DIN rail mountable and includes LED annunciators for each relay, plus one each for power-on and data transfer or test mode.

    • External relays controlled by host instrument
    • AC and DC powered versions • DC power output (AC versions)
    • DC power passthrough (DC versions) to simplify wiring
    • Digital (S3L) passthrough to simplify sensor wiring
    • Red LED annunciators for each relay
    • Green LED indicators for power and digitial (S3L) data transfer
    • Relays may be tested locally, and also via the host instrument