• cool-fit pipe

    • Length: Lengths of 16.4 feet (5 meters)
    • Outer jacket impact resistant.
    • Color: black
    • Insulation made from PUR sizes d250, d280 and d315 are available upon request

  • coolfit prod image

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black
    • Connecting dimensions = Pipe outer diameter * Available as long as our stock will last

  • coolfit90

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • coolfit el90

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • coolfitel45

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • coolfittee90

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • coolfitredtee90

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • coolfit45y

    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black

    * Connecting dimensions = Pipe inner diameter

    For job quotes, Request A Quote....

  • CoolFit Shrink

    • For a water- and steam-tight sealing in combination with buthylene rubber-based sealing tape Length: 100 mm
    • For connections of the same pipe outer diameter

  • CoolFit Fix Point Adapter

    • The product consists of two components: a welding band and a pipe bracket.
    • Electro-fusion welded band as permanent connection to transmit the forces that occur in the pipe to the fixed point.
    • The included pipe brackets are needed to deliver welding pressure during installation and give stability during operation.
    • For welding, use an MSA 250, 300, 350, 400 or commercially available 220V fusion machines.
    • If you use an MSA fusion machine from GF Piping Systems, use the 799 350 339 adapter.
    • Please take note of the maximum allowed forces for this version in the table below.
    • Fixed point brackets and cross braces have to be calculated and obtained by the installer. They are not included in the fixed point set from GF.

  • coolfit installationFittingtype313

    • With 1/2 " Rp threaded branch for sensors (i.e. pressure)
    • Insulation made from PUR Outer jacket impact resistant.
    • Color: black Connecting dimensions = Pipe inner diameter compatible signet pressure sensors: type 2450-1 /-2 /-5

  • Sinet Type 6500 EasyFlow

    Retired - Can still accommodate regular Signet sensors with the Signet Installation Fitting Type 310

    • Fluids and concentrations pre-calibrated
    • Simple speedy change of parameters
    • Velocity from .3 m/s to 6 m/s (1 fps to 20 fps)
    • Battery life up to 1,000 hours
    • Initial start up of hydronic secondary cooling systems
    • Balancing hydronic secondary cooling systems

  • CoolFit installation fitting 313

    • Threaded outlet 1 ¼" NPSM
    • Insulation made from PUR
    • Outer jacket impact resistant.
    • Color: black
    • Connecting dimensions = Pipe inner diameter Compatible Signet flow sensors: models 2551, 2537, 515, 8510, 2536, 8512
    • Compatible Signet pH/ORP sensors: models 2724, 2725, 2726
    • Sensor length depends on installation fitting

  • CoolFit Pipe Calibration

    • To calibrate pipe inner diameters of COOL-FIT Plus pipes 140mm and larger
    • Includes transportation case

  • coolfit_Adaptor

    • Union End: stainless steel (304L) female NPT tread
    • Union Bush: solvent cement socket ABS metric
    • Union Nut: ABS
    • Gasket: O-ring EPDM

  • coolfit_adapterRing

    • This set has to be used in combination with the 546 ball valve
    • Stainless Steel (304L) union end with NPT thread
    • Perfect transition from 546 ball valve to NPT