• Product Image- Duo-Bloc 21 Ball Valve

    • Built-in spanner wrench handle for easy disassembly or maintenance.
    • Panel mounting pad.
    • Double O-ring seals on stem.
    • All sizes full bore.
    • Full vacuum rated.
    • Viton or EPDM O-ring.
    • Blocks in two directions, upstream and downstream, leaving full pressure. on the opposite end of the valve.
    • ISO mounting pad for both manual. and actuated operations.
    • PTFE seats with elastomeric backing. cushions ensure bubble-tight shut-off. and a low fixed torque, while at the same time compensating for wear.
    • True Union design eliminates the need. for flanges and permits installation or repairs without expanding the pipe system. Consult Sales Office for PP and PVDF Socket connections. Consult Sales Office for sizes 2 1/2" - 4".

  • Product Image- Multiport "3-way" Ball Valve

    • Blocks from left or right union ports leaving full pressure on the opposite end of valve.
    • “L” ported ball permits flow from common port to either left or right port or to OFF position (“Tee” port and “double-L” optional).
    • Blow-out proof bottom entry stem.
    • All sizes rated for vacuum service.
    • Polypro and PVDF socket and butt fusion end connectors available.
    • EPDM Available.

  • Product Image- Omni Ball Valve

    • PTFE seats with EPDM cushion.
    • Compact uni-body construction.
    • All sizes rated for vacuum service.
    • Viton O-rings available.
    • Actuator Operators available.

      When solvent cementing non-true union ball valves such as the Asahi Omni Ball Valve, make sure valve is in the open position. This helps vent the fumes from the cement which may cause swelling or damage to the ball.

  • asvLabcockgroup/90

    Labcock

    (8)

    • PVC body.
    • Rated at 120° F up to 150 PSI Water non-shock.
    • Corrosion resistant thermoplastic construction.
    • 1/4-turn operation.
    • Calibrated flow indicator.
    • Vacuum rating 29.9 Hg.
    • Choice of models makes all combinations of hose or thread connections possible.
    • Perfect for laboratory use. Also for process control monitoring or sampling.
    • Lever-type handle for ease of adjustment.

  • Product Image- True Union Ball Check Valve

    • True Union design eliminates the need for flanges and permits installation and repair without expanding the pipeline
    • Uniseat/Seal of EPDM or Viton
    • May be used either vertically or horizontally
    • Minimum shut off is 5 psi
    • All sizes rated for full vacuum service

  • Product Image- True Union Ball Foot Valve

    • True union design eliminates the need for flanges and permits installation or repair without expanding the pipeline.
    • Uniseat/Seal of EPDM. Viton available.
    • May be used either vertically or horizontally.
    • Excellent flow characteristics.
    • Minimum shut-off is 5 psi.
    • All sizes rated for vacuum service.
    • PVC True Union Ball Foot Valve with Viton O-ring available, consult sales office.

  • Product Image- Horizontal Swing Check Valve

    • May be installed in horizontal or in vertical lines.
    • Top entry valve facilitates cleaning without removing from line.
    • All sizes rated for vacuum service.
    • This valve is available in sizes up to 8"