• 6340

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    D sealing providing a positive seal in static or dynamic positions

    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.
    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6366

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx


  • 6505

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6315

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6306

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6304

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6316

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6579

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6325

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6302

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6383

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

     


  • 6388a

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx


  • 6351

    ApplicatioApplications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6521

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6509 swival el

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6508 swival tee

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm
    Optimal sealing
    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.
    High performance materials
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6382

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6326a

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 6322

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx


  • 6503

    Applications: Water and beverages For use with chemicals or other potentially aggressive liquids, contact USCO.

    • Working pressure 1/4”: 230 psi from 35°F to 100°F and temperature 150 psi at 150°F 60 psi at 200°F
    • 3/8”: 190 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • 1/2”: 160 psi from 35°F to 100°F 100 psi at 150°F 60 psi at 200°F
    • Maximum circuit pressure depends equally on the type of tube used.
    • Maximum torque values
      • 1/8 and 1/4: 1.0 ft lbs / 1.5 Nm for plastic threads NPT
      • 3/8 and 1/2: 2.2 ft lbs / 3.0 Nm

    Optimal sealing

    • D sealing providing a positive seal
      in static or dynamic positions
    • pre applied PTFE sealant on threads
      for immediate installation
    • unit quality control and dating
    • automatic sealing: the D seal within the fitting provides a positive seal on the O.D of the tube.In both static and dynamic positions, due to an optimized design of the fitting cavity
    • All Liquifit threaded fittings have a pre-applied PTFE thread sealant to save time during assembly.

    High performance materials                                                               
    Also available with NSF certified thread sealant applied, use 63xx instead of the 65xx

  • 7992

    *Intended for liquids only.
    •Working pressure +34°F (-1°C) to +150°F (65°C)
    •Body Acetal
    •O-Ring EPDM
    •Metal Grip Edge 300 Stainless
    •Temperature Range up to 150 PSI depending on tubing being used
    •Cracking Pressure 1/3 PSI

  • clip 3130