• siiVert1a_image

    • Industrial (ASTM-1998-06) and Commercial design standards are available.
    • Material options for a diverse range of applications.
    • High density linear polyethylene (HDLPE) black and natural white color - complies with FDA Regulations 177.1620 and NSF/ANSI 61 Standards.
    • Cross-linked, high density polyethylene (XLPE) - black and natural white color.
    • Opaque white sodium hypochlorite resin #880059 (up to 12,500 Gal.)
    • Sulfuric acid resin #880046 (up to 15,000 Gal.)
    • Specific gravity ratings are based on the industry's most severe calculation.
    • Standard specific gravity choices are 1.5 and 1.9, other ratings are available upon request.
    • All materials are UV stabilized for long-term outdoor service.

     

    Type I - Tanks molded from cross-linkable polyethylene resin

    Type II - Tanks molded from linear polyethylene resin (not cross-linkable resin)

    Type I tanks shall be made from crosslinked polyethylene resin as manufactured by ExxonMobil Chemical, or resin of equal physical and chemical properties.

    Type II tanks shall be made from linear polyethylene resin as manufactured by ExxonMobil Chemical, or resin of equal physical and chemical properties.

  • Snyder Horizontal

    Horizontal Tanks Horizontal Leg Tanks Rectangular (PCO)

    Featuring

    • Material options for a diverse range of application requirements
    • High-density linear polyethylene (HDLPE)*- black and natural white color - complies with FDA Regulation 177.1520 and NSF/ANSI 61 standards. 
    • Cross-linked, high density polyethylene (XLPE) - black and natural white color
    • Opaque white sodium hypochlorite resin #880059 (up to 525 Gal.)
    • Sulfuric acid resin #880046 (up to 525 Gal.)
    • Low profile designs increase safety factors.
    • Available in a wide variety of styles, 25-3400 gallons.
    • Horizontal products are available in specific gravities up to 1.9.
    • All materials are UV stabilized for long-term outdoor service.

     

    Type I - Tanks molded from cross-linkable polyethylene resin

    Type II - Tanks molded from linear polyethylene resin (not cross-linkable resin)

    Type I tanks shall be made from crosslinked polyethylene resin as manufactured by ExxonMobil Chemical, or resin of equal physical and chemical properties.

    Type II tanks shall be made from linear polyethylene resin as manufactured by ExxonMobil Chemical, or resin of equal physical and chemical properties.

  • Snyder's revolutionary Captor Containment System is designed to alleviate the ever-changing environmental and safety concerns regarding bulk chemical storage and containment for the 21st century.

    • U-vent Assemblies available in a variety of sizes to relieve stress from vacuum or pressure
    • Flanged Outlets and other fitting designs can be secrely fastened and sealed to many of the large flat areas located on the top section of the tank. (optional)
    • OSHA-Approved Ladders available with and without cages in either fiberglass or steel.
    • Bolted and Threaded Manways standard size of 18" available up to 24"
    • Molden in Tank Tie-Down Lugs interfaced with optional cable restraints meets seismic zone of 4 and 110 mph wind requirements.
    • U.F.O (Unified Fitting Outlet) is uniquely desgned to mechanically seal fitting outlet through both the inner and outer tank walls. Material unloading is easier and more cost effective than pumping contents from top of the tank. (optional)
    • Double-Wall Tank Construction interlocks outer and inner tank
    • Outer-Containment Tank provides 115-120% of inner tanks capacity for added safety factor. Complies with 40 CFR-264.193.
    • Tank-Saver Platform System available on 102" Captor, and 102" single wall tanks.

  • Snyder double mini

    Snyder’s latest product innovation, double wall tanks ranging from 35 gallons up to 500 gallons, provides a secondary containment solution in one integral space saving unit.
    The smaller design configurations are ideal for commercial “Day” tank system requirements, and can be used in conjunction with Snyder’s extensive line of larger double wall Captor Containments.

    • Top Draw-Tube Assembly safely dispense contents from the top.
    • 2" Vent provides vacuum relief for interior tank. (optional)
    • Avalilable in XLPE and HDLPE
    • Transition Fitting allows side safe installation and long-term sealing power through both walls of dual containment tank. (optional)
    • Primary Tank available in both closed and open top tank design
    • Large Flat Surace Area provides ample space for a variety of fitting sizes and styles.
    • Rib Reinforced Flat Top Design provides ample surface space for chemical feed pump mounting.
    • Narrow Diameter  for an area of small placement or entry.
    • Secondary Containment Tank provides 120% of inner tanks capacity. Complies with CFR-264.193.
    • Molded-in forklift channels on DCT's sizes 275 gallon through 500 gallons.

  • Snyder Open Top Tanks

    Selection of Open Top Tank  and  Closed Top Tank "TOTAL DRAIN" Systems

    Featuring

    • Mixer Mount Assembly
    • 100% HDLPE Material Construction
    • Top Stiffening Ribs
    • Outward Top Tank Flange Design
    • Flat and Total Drain Bottom Tank Configurations
    • Fitting Options
    • Hinged Lid Design
    • Replaceable Disposable Liner System
    • Molded in Gallon and Liter Markers
    • Unique Stand Leg Design
    • Heavy-Duty Plastic Stand Design

  • Snyder Cone Tanks

    Available in 30, 45 and 60-degree slopes, sizes    Range from 15-13,000 gallons

    Material options for a diverse range of application requirements

    • High-density linear polyethylene (HDLPE) black and natural white color - Complies with FDA regulations 177.1520 and NSF standard 61.
    • Cross Linked, high-density polyethlene (XLPE) - black and natural white color
    • Opauue white sodium hypocholorite resin #880046
    • Available with seismic zone 4 and UBC 110 mph wind resistraint tie-down systems
    • Specific gravity ratings are based on the industry's most severe calculaton
    • Standard specific gravity choices are 1.5 and 1.9 other ratinga are available upoon request
    • All material are UV stabilized for long term outdoor service
    • Maximum operating temperature is 100 degrees F

    Industrial Grade Tank

    Specific Gravity    Color                     XLPE                        HDLPE
        1.5SG               Nat                     xxxxxxxN40            xxxxxxxN43
        1.9SG               Nat                     xxxxxxxN42            xxxxxxxN45
        1.5SG               Blk                     xxxxxxxN46             xxxxxxxN49
        1.9SG               Blk                     xxxxxxxN48             xxxxxxxN51
        1.35SG             Nat                    xxxxxxxN29            xxxxxxxN39
        1.35SG             Blk                   xxxxxxxN132            xxxxxxxN133
        1.9SG              Sulfuric HDLPE #8800046                 xxxxxxxN030 
        1.9SG              Opaque HDLPE #8800059                xxxxxxxN52
    Call our Sales Specialist for a quote on the above listed options 800-343-7555 or plastics@fwwebb.com

     

     

  • siiChemicalFeedStation

    Complete and ready to use Chemical Feed Stations allow you to handle small amounts of liquids and other chemicals in a safer and more efficient manner than drums. The Chemical Feed Stations can be located close to your customer’s use point, thereby eliminating the need for them to move and handle heavy drums and tote bins of hazardous materials, while at the same time eliminating the handling costs and inconvenient disposal of drums and one-way tote bins. Tanks available in both HDLPE and XLPE.

    Industrial Grade Tank

    Specific Gravity    Color                     XLPE                        HDLPE
        1.5SG               Nat                     xxxxxxxN40            xxxxxxxN43
        1.9SG               Nat                     xxxxxxxN42            xxxxxxxN45
        1.5SG               Blk                     xxxxxxxN46             xxxxxxxN49
        1.9SG               Blk                     xxxxxxxN48             xxxxxxxN51
        1.35SG             Nat                    xxxxxxxN29            xxxxxxxN39
        1.35SG             Blk                   xxxxxxxN132            xxxxxxxN133
        1.9SG              Sulfuric HDLPE #8800046                 xxxxxxxN030 
        1.9SG              Opaque HDLPE #8800059                xxxxxxxN52
    Call our Sales Specialist for a quote on the above listed options 800-343-7555 or plastics@fwwebb.com

     

     

  • sii_IBCtanks

    Intermediate Bulk Containers
    Snyder’s unique all polyethylene IBC designs are lightweight, durable and corrosion resistant. Available in a wide variety of shapes and sizes up to 550 gallons, these IBCs are ideal for both hazardous and non-hazardous liquid applications. Rotationally molded in wall thicknesses up to a half inch or more, Snyder’s plastic IBCs provide some of the industry’s highest useful-life-to-cost ratios. Standard plastic IBCs can also be customized with different components, colors, and permanent proprietary company or product information markings to meet specific application requirements.

    Industrial Grade Tank

    Specific Gravity    Color                     XLPE                        HDLPE
        1.5SG               Nat                     xxxxxxxN40            xxxxxxxN43
        1.9SG               Nat                     xxxxxxxN42            xxxxxxxN45
        1.5SG               Blk                     xxxxxxxN46             xxxxxxxN49
        1.9SG               Blk                     xxxxxxxN48             xxxxxxxN51
        1.35SG             Nat                    xxxxxxxN29            xxxxxxxN39
        1.35SG             Blk                   xxxxxxxN132            xxxxxxxN133
        1.9SG              Sulfuric HDLPE #8800046                 xxxxxxxN030 
        1.9SG              Opaque HDLPE #8800059                xxxxxxxN52
    Call our Sales Specialist for a quote on the above listed options 800-343-7555 or plastics@fwwebb.com

     

     

  • Snyder Fittings

    • Ladders & Seismic Restraint Systems
    • Variety of Manways
    • Sight gauge Assemblies
    • Insulation and Heat Tracking
    • Flexmaster a flexible tank connection
    • Threaded Bulkhead Fittings
    • Double Flanged Fittings with PE Encapsulated Bolts
    • Sii Stainless Steel Double Flanged Fittings

     

  • LMIAGITATORcolor

    Agitator

    The agitator is motor-operated with 5/16-in. epoxycoated 303 SS shaft and impeller.

    Features

    • Provided with 6 ft (1.8 m) of power cord and 3-prong grounded plug
    • Complete installation instructions with four 10-24 bolts for mounting

    Specifications

    • 1/20 hp, shaded pole motor. 115 VAC, 50/60 Hz, 1.5 A, 175 watts.

     

    Liquid Level Switch Assembly

    Features

    • Corrosion-resistant switch assembly housing of glass reinforced polypropylene
    • PVC float tube
    • Foamed polypropylene float with encapsulated reed switch
    • Float protector prevents false actuation from rough handling or turbulence
    • Low voltage (12 VAC) reset switch for safety
    • Neon-mode indicator lights
    • Provided with 6 ft (1.8 m) of power cord and 3- prong grounded plug.

    Specifications

    • 115 VAC, 60 Hz, 6 A (max. load)