• rywBISstarQuickClamp

    Features and benefits  http://youtu.be/Hx3iU280oHk

    • one-part clamp
    • clamp closes by applying pressure to the pipe
    • for outdoor use and installations in swimming pool environments, chemical factories, zinc factories, etc.
    • due to a patented profile it is possible to tack several clamps to each other (up to 1 ¼" CP) 
    • material: modified PA6 (polyamide), grey (according to RAL 7035)
    • resistant to UV, aging, oil and gasoline
    • corrosion-free, recyclable, halogen free
    • temperature resistance: -40 ºF to +190 ºF constant, +260 ºF peak (Note: temperature must be above 15 °F during installation process)
    • Plenum rated - tested to ASTM E-84

  • rywAccessories

    The starQuick® system offers various time and cost-saving solutions for installing two or more parallel conduits. It is possible to tack more than one starQuick® Clamp together Additional solutions include the starQuick® Fixing Rail and starQuick® Duo Bracket; the ultimate solution for multiple conduit runs.

  • rywRapidRail
  • rywBismatGroup

    BISMAT® 2000 is a unique Black rubber lined pipe clamp. This two-part clamp has a hinged side and the BISMAT® single screw patented locking system. The BISMAT® quick locking system is easy to close with one hand which makes it easier and faster for installation. The rubber lining is made of UV-resistant EPDM and is noise insulating according to DIN 4109. The BISMAT® 2000 is zinc plated for corrosion resistance.

    BISMAT® 5000 is a Green rubber lined pipe clamp uniquely designed for plastic pipe applications. This two-part clamp has a hinged side and the BISMAT® patented single screw locking system. The special green UV-resistant EPDM rubber lining is flush and especially designed to improve sliding properties for plastic pipes. The patented removable spacer washers between flanges make this clamp suitable for sliding or fixed points. Noise insulating according to DIN 4109. The BISMAT® 5000 is zinc plated for corrosion resistance.

  • rywWclampImage

    The W Strut clamp mounts pipes to strut. One size can fit multiple pipes, reducing the typees of clamps needed to complete a project. It's patented one piece design and durability allows installers to prefabricate a job, saving time and labor cost in the process.

    Features and benefits

    • suitable for hot and cold water plastic pipes
    • with removable spacer washers, making the clamp suitable for either sliding or anchoring
    • designed to fit into strut
    • quick one handed close
    • alternative for cushion clamp
    • pre-assembled with fully integrated rubber lining and closing screw
    • material: steel 1.0242
    • surface treatment: high grade Zn-Mg based coating (600 hours salt spray)
    • noise insulating lining, EPDM rubber, green
    • age resistant lining

     

     

  • W2000Image

    The W Strut Clamp is the latest, revolutionary way to mount pipes to strut.
    One size can fit multiple pipes, reducing the types of clamps needed to complete a project.
    Its patented one-piece design and durability allows installers to prefabricate a job, saving time and labor costs in the process.
    Simply stated—the W Strut Clamp is an easier, safer and affordable solution for any installation project.



    Features and benefits

    • For metal pipe applications
    • One piece design – no loose parts
    • Easier, faster, safer – installs with one hand
    • Surface treatment: high grade Zn-Mg based coating (600 hours salt spray)
    • 4 way screw head – phillips, flat, hex and square drive
    • Rubber lined for corrosion protection and noise/vibration insulation
    • Unique design allows one clamp to fit multiple pipe sizes – less items to stock
    • W Strut Clamps are boxed for easy handling – no more bags

  • ryw

    For plastic lead throughs or metal pipes The BIS Pacifyre® MK II Fire Stop is a single part fire sleeve which seals a pipe lead-through with a grommet type seal making it fire resistant and smoke tight. Only one BIS Pacifyre® MK II Fire Stop is required to seal off the aperture between the pipe and the wall or ceiling making it fire resistant and smoke proof. Escape routes and rescue access therefore remain unobstructed for longer and free of smoke, allowing occupants to vacate the building in good time and in a safe manner.

    Unique features

    The Pacifyre® has many unique properties. The sleeve:

    • is easily and simply installed
    • is suitable for apertures through floors, ceilings, solid walls and stud walls
    • is maintenance-free and unaffected by moisture or any other building chemicals in common use
    • does not affect the duct or any other construction components
    • guaranteed to remain operational for decades
    • permits shrinkage and expansion or sideways movement of the ducting
    • does not contain any asbestos or other dangerous substances
    • does not emit any toxic fumes or develop any smoke worth mentioning in the event of fire
    • limits operational noise transmission between pipe and wall or ceiling