• Wilden1p8

    The Pro-Flo™ patented air distribution system incorporates three moving parts: The unbalanced air valve spool, the pilot spool, and the main shaft/diaphragm assembly. The air valve spool location directs pressurized air to one air chamber while exhausting the other. The pressurized air chamber causes the main shaft/diaphragm assembly to move outward discharging liquid on that side and pulling liquid in on the other side. When the shaft reaches the end of its stroke, the opposite inner piston actuates the pilot spool. The pilot spool location either pressurizes or exhausts the large end of the unbalanced air valve spool. When the large end is pressurized, the piston is forced up so that the air supply is routed through the air valve spool to the right side of the pump. When the large end is exhausted, the piston is forced down so that the air supply is routed through the air valve spool to the left side of the pump. Note: This valve design incorporates an unbalanced spool with the smaller end of the spool pressurized continuously.

    Market Position

    • Features Variable Control (Flow Rates & Air Consumption)
    • Superior flow rate
    • Superior anti-freezing
    • Submersible Options
    • ON/OFF reliability
    • Most efficient (SCFM/GPM)
    • ATEX Models Available
    • Lube-free operation

    Features

    • Metal C-block.
    • Non-stalling unbalanced spool
    • Few replaceable parts

    Application Traits

    • Maximize Performance to the Applicaiton
    • All Metal Construction
    • Process applications
    • Max. mean time between failures

    Availability

    • 13 mm (1/2") through 51 mm (2") pumps

  • Wilden1x8

    The Pro-Flo X™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X™ air distribution system (ADS) is derived from the Pro-Flo® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by the patent pending Efficiency Management System (EMS™) which optimizes the Pro-Flo X™ ADS for the actual operation parameters, regardless of application demands or pump size. Due to its ground-breaking design, the Pro-Flo X™ and EMS™ technology are simple and easy to use. This is because of the integrated control dial located at the top of the ADS, which allows users to control the flow rate that best suits the application. The results are higher performance, lower operational costs and performance flexibility that goes far beyond what was considered the industry standard. The Pro-Flo X™ ADS is guaranteed to set the AODDP world ablaze. Making previously restrictive rules for AODD pump use obsolete, the Pro-Flo X™ ADS will out pace, out match and out perform the harshest of conditions.

    Market Position

    • Variable Control (Flow Rates & Air Consumption)
    • Superior flow rate
    • Superior anti-freezing
    • Submersible Options
    • ON/OFF reliability
    • Most efficient (SCFM/GPM)
    • ATEX Models Available
    • Lube-free operation

    Feature

    • Metal C-block.
    • Non-stalling unbalanced spool
    • Few replaceable parts

    Application Traits

    • Maximize Performance to the Applicaiton
    • All Metal Construction
    • Process applications
    • Max. mean time between failures

  • wildena1a2mm..

    The Accu-Flo™ pump technology employs a two-position, four-way solenoid valve that has a single operator and spring return. The valve is internally air piloted for longer coil and operator life. Air pressure is utilized to fill air chambers and displace the diaphragms, but electrical impulses dictate stroke rate. When the solenoid is unpowered, the air valve piston is held by a spring to the top of the air valve body. In this position, the air supply is directed to the right side of the pump while the left air chamber is exhausted. When the solenoid is powered by electricity, air pressure is routed to the top of the air valve piston which overcomes the tension of the spring and forces the piston down. In this position, the air valve piston directs the air supply to the left side of the pump and exhausts the right side. By alternately applying and removing electrical power, the Accu-Flo™ pump reciprocates back and forth similar to standard air-operated pumps.

    Market Position Features

    • Direct electrical interface
    • Superior ON/OFF reliability
    • Reduced systems costs
    • Lube-Free operation

    Features

    • Externally controlled
    • Various voltage and currents
    • Nema 4, Nema 7, or Cenelec
    • Simple installation
    • Wilden accessory interface

    Application Traits

    • System automation
    • 4-20 mA (pH adjusting)
    • Batching Applications
    • OEM accounts

    Availability

    • 6 mm (1/4") pumps
    • 10 mm (3/8") pumps
    • 13 mm(1/2)" pumps
    • 25 mm (1)" pumps
    • 38mm (1 1/2)" pumps
    • 51 mm (2") pumps
    • 76 mm (3") pumps

  • wilden px80051mm

    The Pro-Flo X™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X™ air distribution system (ADS) is derived from the Pro-Flo® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by the patent pending Efficiency Management System (EMS™) which optimizes the Pro-Flo X™ ADS for the actual operation parameters, regardless of application demands or pump size. Due to its ground-breaking design, the Pro-Flo X™ and EMS™ technology are simple and easy to use. This is because of the integrated control dial located at the top of the ADS, which allows users to control the flow rate that best suits the application. The results are higher performance, lower operational costs and performance flexibility that goes far beyond what was considered the industry standard. The Pro-Flo X™ ADS is guaranteed to set the AODDP world ablaze. Making previously restrictive rules for AODD pump use obsolete, the Pro-Flo X™ ADS will out pace, out match and out perform the harshest of conditions.

    Market Position

    • Variable Control (Flow Rates & Air Consumption)
    • Superior flow rate
    • Superior anti-freezing
    • Submersible Options
    • ON/OFF reliability
    • Most efficient (SCFM/GPM)
    • ATEX Models Available
    • Lube-free operation

     

  • wilden px80051mm

    The Pro-Flo X™ is the latest innovation to the AODD pump world. The development of Wilden's Pro-Flo X™ air distribution system (ADS) is derived from the Pro-Flo® family and offers an alternative with operational flexibility never before seen. This flexibility is accomplished by the patent pending Efficiency Management System (EMS™) which optimizes the Pro-Flo X™ ADS for the actual operation parameters, regardless of application demands or pump size. Due to its ground-breaking design, the Pro-Flo X™ and EMS™ technology are simple and easy to use. This is because of the integrated control dial located at the top of the ADS, which allows users to control the flow rate that best suits the application. The results are higher performance, lower operational costs and performance flexibility that goes far beyond what was considered the industry standard. The Pro-Flo X™ ADS is guaranteed to set the AODDP world ablaze. Making previously restrictive rules for AODD pump use obsolete, the Pro-Flo X™ ADS will out pace, out match and out perform the harshest of conditions.

    Market Position

    • Variable Control (Flow Rates & Air Consumption)
    • Superior flow rate
    • Superior anti-freezing
    • Submersible Options
    • ON/OFF reliability
    • Most efficient (SCFM/GPM)
    • ATEX Models Available
    • Lube-free operation

     

  • wilden px80051mm

    The Accu-Flo™ pump technology employs a two-position, four-way solenoid valve that has a single operator and spring return. The valve is internally air piloted for longer coil and operator life. Air pressure is utilized to fill air chambers and displace the diaphragms, but electrical impulses dictate stroke rate. When the solenoid is unpowered, the air valve piston is held by a spring to the top of the air valve body. In this position, the air supply is directed to the right side of the pump while the left air chamber is exhausted. When the solenoid is powered by electricity, air pressure is routed to the top of the air valve piston which overcomes the tension of the spring and forces the piston down. In this position, the air valve piston directs the air supply to the left side of the pump and exhausts the right side. By alternately applying and removing electrical power, the Accu-Flo™ pump reciprocates back and forth similar to standard air-operated pumps.

    Market Position Features

    • Direct electrical interface
    • Superior ON/OFF reliability
    • Reduced systems costs
    • Lube-Free operation

    Features

    • Externally controlled
    • Various voltage and currents Nema 4, Nema 7, or Cenelec
    • Simple installation
    • Wilden accessory interface

     

    Application Traits

    • System automation
    • 4-20 mA (pH adjusting)
    • Batching Applications
    • OEM accounts

    Availability

    • 6 mm (1/4") pumps
    • 10 mm (3/8") pumps
    • 13 mm(1/2)" pumps
    • 25 mm (1)" pumps
    • 38mm (1 1/2)" pumps
    • 51 mm (2") pumps
    • 76 mm (3") pumps