• GoatTP_ImageDetail

    Simpler, safer and far less expensive than electric pumps
    A few strokes of the plunger can pressurize any container from 5-gallon jugs to 55-gallon drums — with no potential sparking hazard which make electric pumps unsuitable for many uses. This revolutionary pump delivers unparalleled value and reliability and quickly pays for itself by preventing potentially hazardous spills while assuring precise, measurable flow control and RCRA empty containers.

    • Durable: Built to last and constructed of 100% non-reactive polypropylene, GoatThroat pumps are engineered to work up to 10 years.
    • Safe: Eliminate drips, costly spill hazards, and VOCs. These pumps also prevent accidents and repetitive motion injuries.
    • Value: With the capacity of an electric pump at the cost of a hand pump, GoatThroat‘s one touch tap system dispenses liquids at a controlled rate to prevent waste, conserve your inventory, and produce precisely measured amounts every time. Smooth uncontaminated flow delivers volume up to 4.5 gpm. Best up to 270 centipoise, 1400 SSU, 300 centistokes.
    • Versatile: Safe for use with more than 750 listed liquids, fits all common container sizes, offers the most useful accessories in the market today.
    • Proven: Thousands now in use by laboratories, hospitals, agricultural facilities and industries from aviation to zookeeping.

    Environmental Compliance  
    http://goatthroat.com/complete-chemical-liquid-compatibility-guide/

    GT-100 (Red) with Nitrile seal for petroleum-based products including oil, glycerine, chloride, ethanol, etc.
    GT-200 (Blue) with EPDM seal for general purpose chemicals including acids, acetates, alcohols and phosphates. 
    GT-300 (Green) with Viton® seal for aggressive chemicals & solvents including bromine, sulphurc acid, ethylene, niric acid, pesticides, gasoline, diesel etc.

  • GoatTP_access3

    Safety features
    The pumps have two safeguards to prevent overpressurization:
        An external pressure release valve can be opened to vent pressure manually before removing the pump from a container.
        As an additional safeguard, an internal pressure relief valve automatically opens if container pressure exceeds 8 psi.
    The pump is repairable
    Do not throw this pump away. Properly serviced, the pump will last for years. See trouble shooting guide for common problems. O-ring replacement kits and other parts are available from your dealer should you need them.
    Operating parameters
    Pressure 2-8 psi nominal,
    8 psi maximum Operating Temperature 32º to 110ºF (0º to 43ºC)
    Storage Temperature -4º to 122ºF (-20º to 50ºC)
    Siphon tube length 9” to 40” (230 mm to 920 mm)
    Container neck size Small seal..............1.8-2.0” (44.4-52 mm) Medium seal ........2.0-2.2” (52.5-56 mm) Large seal ............2.2-2.4” (56.5-60 mm) Maximum flow Water ....................4.5 gallons per minute rates at 68ºF Oil (SAE 30)..........1.0 gallons per minute
    Viscosity Range Best up to 2000 SSU, 270 CP,
    300 CST Drum seal sizes Small seal......1.8” (44.4 mm) Medium seal ........2.0 (52.5 mm) Large seal.....2.25” (56.5 mm)Ensuring Worker Safety & Environmental Compliance  
    http://goatthroat.com/complete-chemical-liquid-compatibility-guide/

    GT-100 (Red) with Nitrile seal for petroleum-based products including oil, glycerine, chloride, ethanol, etc.
    GT-200 (Blue) with EPDM seal for general purpose chemicals including acids, acetates, alcohols and phosphates. 
    GT-300 (Green) with Viton® seal for aggressive chemicals & solvents including bromine, sulphurc acid, ethylene, niric acid, pesticides, gasoline, diesel etc.