• sg5-1a

    Inch Polypropylene Fittings

    The PP Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. to 1/2" O.D. The fittings are manufactured in white polypropylene with food grade EPDM O-rings. They have been developed to satisfy the filtered pure water market and wide range of applications.

    The PP Range is NOT suitable for compressed air applications.

    Working Pressures and Temperatures
    Water Max. 150 psi at 70°F (Max. 10 Bar at 20°C)
    Max. 60 psi at 140°F (Max. 4 Bar at 60°C) Min. 33°F/1°C

    Detailed technical information call our Thermoplastic Specialist

  • jg8-1a

    Inch Polypropylene Fittings

    The PP Range of Black Polypropylene Fittings has been developed to satisfy the needs of the Water Purification and Beverage Dispensing Markets. Black Polpropylene Fittings are U.V. Stabilized and are ideal for use in Agricultural Spraying, Car Wash Chemical Dispense, Farm Machiner and Dairy Equipment Applications.

    The PP Range is NOT suitable for compressed air applications.

    Working Pressures and Temperatures
    Water Max. 150 psi at 70°F (Max. 10 Bar at 20°C)
    Max. 60 psi at 140°F (Max. 4 Bar at 60°C) Min. 33°F/1°C

    Detailed technical information call our Thermoplastic Specialist

  • jg9-1a

    Inch Acetal Fittings (Gray)
    The PI Range of inch-size push-in fittings is offered for tube sizes 5/32" O.D. to 1/2" O.D. The fittings are manufactured in gray acetal copolymer with food grade nitrile O-ring, making them especially suitable for applications involving foodstuff and potable liquids. They are also suitable for air and inert gases and can therefore be used on CO2 lines, pneumatic applications and vacuum. 

    Working Pressures and Temperatures 5/32”-5/16”
          Max. 230 psi at 68˚F 
          Max. 150 psi at 150°F
    Working Pressures and Temperatures 3/8”-1/2” 
          Max. 150 psi at 68˚F
          Max. 100 psi at 150°F

    Detailed technical information call our Thermoplastic Specialist

  • jg9-1a

    Inch Acetal Fittings (White)

    The CI Range of inch-size fittings is offered for tube sizes 1/4" O.D. and 3/8" O.D. The fittings are manufactured in white acetal, with a food grade EPDM O-ring. They have been developed for the water industry but are equally suitable for other potable liquids. They are also recommended for intermittent hot water applications.

    Working Pressures and Temperatures 
          Max. 150 psi at 70˚F 
          Max. 100 psi at 150°F
          Min.  33°F/1°C

    Detailed technical information call our Thermoplastic Specialist

  • jg14-00

    For use with Stainless Steel Tubing
    The SI Range of inch-size push-in fittings is offered for tube sizes 1/4" O.D. to 3/8" O.D. Superseal is a special fitting designed to provide extra grip on stainless steel tubes.
    The Superseal design features a collet with integrally molded stainless steel teeth similar to the standard Super Speedfit design, but incorporating an additional hand-operated nut and wedge shaped plastic washer to apply extra pressure to the collet and the double O-ring seals. This ensures that the collet teeth bite thoroughly into the tube to provide grip, while at the same time compressing the o-rings to further enhance sealing.

    Like other John Guest Fittings, Superseal is suitable for potable liquids and other food quality applications.

    Working Pressures and Temperatures 
    1/4"-5/16"      Max. 230 psi at 68˚F 
                         Max. 150 psi at 150°F
      
    3/8"               Max. 150 psi at 68˚F 
                         Max. 100 psi at 150°F

    Detailed technical information call our Thermoplastic Specialist
     


     

  • jg15-01

    Metric Polypropylene Fittings The PPM Range of metric size push-in fittings is offered for our tube sizes 8mm O.D. to 15mm O.D. The fittings are manufactured in white polypropylene with EPDM o-rings. They have been developed to satisfy the compatibility needs for a wide range of applications. The PPM Range is NOT suitable for compressed air applications. For these situations we recommend the PM Range on pages 16-18.

    Working Pressures and Temperatures 
    Water    Max. 150 psi at 70˚F 
                 Max. 60 psi at 140°F

    Detailed technical information call our Thermoplastic Specialist
     

  • jg16-00

    Metric Acetal Fittings The PM Range of metric-size push-in fittings is offered for tube sizes 4mm O.D. to 28mm O.D. The fittings are manufactured in black acetal copolymer with food grade nitrile O-rings. Especially produced for foodstuff and potable liquids, they are equally suitable for air and inert gases and can therefore be used on CO2 lines, pneumatics applications and vacuum.

    Working Pressures and Temperatures 
    4-8mm        Max. 230 psi at 68˚F 
                      Max. 150 psi at 150°F

    Working Pressures and Temperatures 
    10-22mm    Max. 150 psi at 70˚F 
                      Max. 60 psi at 140°F

    Detailed technical information call our Thermoplastic Specialist
     

  • jg32-00

    The PEI Range of JG Twist & Lock® Fittings is offered in 1/2”, 3/4” and 1” CTS sizes. The fittings are manufactured from high quality engineered plastic with EPDM O-Rings. Speedfit Push-in System is suitable for hot and cold water plumbing applications.

  • jg34-00

    The Black PEI Range of Twist & Lock Fittings is offered in ¾" and 1" CTS sizes. They have been specifically designed for Water Filtration/Softener Installs; however, they are also suitable for Marine and R.V. applications. The fittings are manufactured from high quality engineered plastic with EPDM O-rings. Speedfit Push-in system is suitable for hot and cold water plumbing applications.

  • jg000



    John Guest’s state-of-the-art polymer material gives ProLock toughness you can trust. And that’s just part of the story – see what else sets ProLock apart.
    roLock fits everything, everywhere: copper, PEX, or CPVC. No adaptations, modifications, or tools. Ever.



  • jg21-00

    The ASVPP Range of inch-size Angle Stop Adapter Valves is offered in white polypropylene with food grade EPDM o-rings. Our Angle Stop Adapter Valve connects between your valve and riser, to the main water supply line, for applications in Reverse Osmosis, Filtration Systems, Automatic Coffee Brewers, Ice-makers, and many more. Please refer to our Technical Support Department for guidance on use with other potable liquids.

    Working Pressures and Temperatures 
    4-8mm        Max. 230 psi at 68˚F 
                      Max. 150 psi at 150°F

    Working Pressures and Temperatures 
    10-22mm    Max. 150 psi at 70˚F 
                      Max. 60 psi at 140°F

    Detailed technical information call our Thermoplastic Specialist